Tips for bygging og reparasjon. Byggetriks. Arealantall etasjer arkitektur
I hverdagen Det hender ofte at vi gjør noe galt og bygging er intet unntak. Det hender at du har jobbet med noe byggemateriale i årevis, men du visste enten ikke vanskelighetene ved å jobbe med det i det hele tatt, eller hadde upålitelig informasjon. Og ofte ønsker du å høre råd fra en fagperson som har spesialisert seg på bygg. Vår "reparasjonstips"-seksjon ble opprettet på grunn av mange forespørsler fra nettstedets brukere. Vi har gjort jobben for deg. Vi intervjuet profesjonelle byggherrer og de delte sine triks med oss. Mange vil finne svar på kommentarene de skrev her. I denne artikkelen kan du lære mye ny, interessant og nyttig informasjon fra bygningsråd. Skaff deg kunnskap.
1) Du kan bruke et design selv på en vanlig flis. For å gjøre dette må du kutte ut en sjablong med ønsket mønster fra tykt papir og feste den fast på flisen med gummilim (etter å ha tørket flisen med aceton). Bil-nitroemalje påføres åpne områder av overflaten ved hjelp av en sprøyte (du kan bruke nitromaling i en aerosolpakke). Etter at malingen har tørket, fjernes sjablongen. Belegget vil være motstandsdyktig mot fuktighet, glatt og skinnende.
2) For å forlenge levetiden til papirtapet, belegg det med NTs-228-lakk, som skaper en slitesterk film. Lakken tørker raskt, så den må påføres med en bred myk børste i parallelle striper. For å unngå hengende og drypp bør børsten dyppes i ikke mer enn en tredjedel av lakken.
3) Til naturlig lys for fremtiden din landsted var enhetlig, bør avstanden fra vinduet til nærmeste vegg ikke være mer enn én meter.
4) Ved kontaktpunkter trekonstruksjoner med metall eller murstein må du legge takpapp. Du kan erstatte takpapp med glassine, men mellom trevegger og murverk Takpapp og glassin kan ikke legges. Det dannes kondens på dem og treveggen blir fuktig, noe som deretter vil føre til at den råtner.
5) I de første ukene av driften av brønnen må du trekke ut så mye vann som mulig fra den. I dette tilfellet vil tomrom fylt med vann dannes i bakken rundt filteret, og filteret vil ikke bli tilstoppet, og brønnen vil glede deg med en stor mengde livgivende fuktighet. Prøv å bruke brønnen regelmessig for å forhindre at tomrom trekkes inn.036. Ødelagt emalje i badekar og vasker kan gjenopprettes med KO-174 emalje i aerosolemballasje eller ved bruk av flytende glass og hvit sement med en karakter på minst "300". Sement blandes i flytende glass til en kremet konsistens og påføres en tidligere rengjort og avfettet overflate. Full herdetid er 5-6 timer.
6) Hvis du vil lage en vannvarmekjele selv, må du vite at arealet til den varmemottakende overflaten skal være 1 kvadratmeter. for hver 100 kvm. oppvarmet rom.
7) Designarbeid Det er bedre å utføre landskapsarbeid om høsten, det vil si før snøen faller. Selskapet vil kunne fullføre prosjektet i løpet av vinteren.
8) Hvis din landsted bygget fra et tømmerhus eller tømmer, så vil et antiseptisk middel redde det fra å råtne.
9) Dersom du skal inngå avtale med et selskap engasjert i landskapsdesign, så husk at i mange selskaper er det endelige beløpet for utført arbeid forskjellig (ikke i din favør!) fra beløpet som er angitt i estimatet. Vær forberedt på "jukser" og velg et selskap hvis aktiviteter vil bli fortalt deg av kunder som har jobbet med det.
10) Hvis du ikke har mulighet til å kontrollere fremdriften i bygging og reparasjonsarbeid på tomt, anbefaler advokater å inngå en avtale med en pensjonist som tidligere har jobbet i en byggeorganisasjon.
11) Hellingen på taket til hjemmet ditt påvirker snøakkumuleringen betydelig. Den "dårligste" vinkelen anses å være en vinkel på 25-30°. En større vinkel gjør at vinden blåser vekk snøen, mens en mindre vinkel ikke hindrer snø i å skli av taket.
12) De fleste eksperter er enige om at det mest populære av alle isolasjonsmaterialer er den sertifiserte Isover-isolasjonen.
13) Et av de mest populære byggematerialene i dag er gips. De brukes til å dekorere vegger, tak og skillevegger. Dette materialet er gips dekket med papir på toppen. Hvordan fikk han en slik popularitet? Mange mennesker er tiltrukket av gips fordi det er veldig enkelt og enkelt å jobbe med, pluss at levetiden ikke er dårligere enn andre. etterbehandling materialer. Gips er også praktisk i materiell henseende du vil betale relativt lite for selve materialet og arbeidet. en liten mengde, samtidig som de oppnår utmerket kvalitet. Gips er fremtidens materiale!
14) For at landstedet ditt skal stå på et solid fundament, anbefaler eksperter å bygge monolittisk fundament. Fordelen med dette fundamentet fremfor et fundament laget av murstein og blokker er at materialet som brukes og konstruksjonsteknologien praktisk talt eliminerer deformasjon av fundamentet over tid.
15) Hvis du planlegger å bygge et vinterhus av tømmer, må du huske at tykkelsen på veggene må være minst 150 mm. Ved bruk av tynnere tømmer skal veggen isoleres.
16) For bygging av et landsted anbefaler eksperter å bruke laminert finertømmer. Dette vil redusere byggetid, siden det ikke krever krympetid.
17) hvordan feste fuktbestandige paneler til malt gips? - Svar: det er lurt å slipe malingen, men den kan festes med spesielle flytende spiker uten løsemidler. Fest den fra bunnen og toppen enten med en profil eller med enkle selvskruende skruer slik at den ikke beveger seg før neglene tørker.
18) Det finnes mange typer klimaanlegg og de trenger ikke nødvendigvis å installeres i et vindu. Det er til og med klimaanlegg som ikke krever installasjon i det hele tatt og som kan flyttes fritt rundt i leiligheten.
19) Er det mulig å bruke plastavløpsrør i landet, grave dem ned i bakken og tappe avløpsvann? - Svar: det er fullt mulig å bruke, det er bedre å velge importerte (tykke vegger), vanligvis er de oransje. De er lettere å installere. Det er også nødvendig å tenke på å isolere rørene hvis du planlegger å bruke avløpet om vinteren.
20) det er mange måter å dekorere porselensfliser på: border, innlegg, roser, etc. Dekorative elementer I serier av uglasert porselenssteintøy er de oftest laget etter mosaikkmetoden. Det er sannsynligvis bare ett råd her - "mål syv ganger, kutt en gang," fordi det i prinsippet ikke er noe komplisert, det viktigste er å ta målene riktig og kutte i henhold til dem. Jeg anbefaler deg å overlate skjæringen til fagfolk, siden det vil være billigere i form av penger og nervene dine vil være intakte. Kostnaden er et sted rundt 80 rubler. sq. m. for et rett kutt
21) mosaikken er limt til veggen, nesten som vanlige fliser. Naturligvis er gipsplate dekket med tapet ikke egnet for dette, veggene må forberedes. Og liming er veldig enkelt - det er limt til nettet, limt med frontflaten opp. Lykke til med oppussing!
22) ikke kjøp materiale i små butikker i byen din. Ikke vær lat, gå til butikker som "Leroy Merlin", "Costorama", etc. Kvalitet også, og besparelser på nesten 50 %....
23) hvordan installere en mikrobølgeovn på kjøkkenet på en original måte med minimalt tap av plass. Råd til deg som har spiskammer i tilknytning til kjøkkenveggen. Vi gjorde dette: vi kuttet ut et vindu i veggen som skapet er plassert bak og satte inn mikrobølgeovnen slik at den selv står på en hylle i pantryet, og på kjøkkenet er det bare en dør i veggen i flukt med veggen . Vakker, komfortabel og stilig.
24) Hvordan sparkle på malte vegger. Til å begynne med, hvis malingen ikke har skrellet av, skrape veggen med en skarp gjenstand, som en spiker, fortynn deretter en løsning av PVA-lim, sand og vann, sanden skal være fin, elvesand. Du trenger ikke mye sand. Vi behandler overflaten av veggen med den resulterende løsningen, vent til den tørker helt, arbeidsflaten er klar for kitt. Lykke til!
25) Ikke ansett tadsjik til å hjelpe og ansette russere. Det er kynisk, men renoveringen fungerer SÅ mye bedre...
26) Hvis det er vanskelig å pakke inn en skrue i hardt tre, så er det bedre å lage en liten fordypning med en syl og gni selve skruen med såpe. Etter dette går skruen veldig lett inn.
27) den første stikksagen ble oppfunnet i 1923
Byggtips
28) gips er utrolig brannbestandig. Den tåler flamme i ca 30 minutter.
29) for at skruen skal strammes bedre inn i treverket, må den først gnides med såpe.
30) en ny kost holder lenger hvis du legger den i bløt i 2-3 timer i varmt saltvann.
31) for gjengede tilkoblinger av en rørledning, kan vanlig tyggegummi tjene som et elegant, pålitelig tetningsmiddel: tygg, mykgjør, strekk, vikle rundt tråden, vri tilkoblingen og glem lekkasjer.
32) dørhengsler vil ikke knirke hvis de ikke smøres med olje i tide - dette rådet har lenge vært kjent. Men du kan klare deg uten smøring. For å gjøre dette må du lage en skive fra en polyetylenkork og sette den på hengselpinnen.
33) For å forhindre at oljemaling tørker ut under lagring og for å hindre at det dannes en film på den, bruk vårt råd: legg en sirkel med tykt papir på overflaten av malingen og fyll den med et tynt lag tørkende olje.
34) lukten av oljemaling i rommet vil forsvinne raskere hvis du plasserer plater med salt flere steder.
35) hvis du ikke har elektrisk tape for hånden når du reparerer elektriske ledninger, pakk ledningene med tape kuttet fra en plastpose, smelt den med en lighter og isoler forbindelsen med den smeltede massen.
36) utkast er tapets verste fiende.
37) ved hjelp av en byggeplass kan du gjøre reparasjoner med egne hender og bygge ethvert objekt.
38) hodet på den brukte aerosolen satt inn i en gummipære gjør den til en utmerket væskesprøyte.
39) ikke bli opprørt hvis du ikke har spesielle kroker for gardiner, de kan erstattes med binders.
40) en blanding av krittpulver blandet med silikatlim påført vindusglass gjør den matt.
41) hvis du smører en snøskuffe med parafin, vil ikke våt snø feste seg til den.
42) den enkleste enheten for gravering av glass og metall oppnås ved å feste en glasskutterrulle til en elektrisk motor.
44) en sag med centimeterinndelinger påført bladet er veldig praktisk å bruke. hakkene kan påføres med en meisel eller en trihedron.
45) når du kalker vegger eller tak med pensel, vil kalkmørtelen påføres jevnere hvis du legger en nylonstrømpe på børsten i to eller tre lag.
46) en rund stålstang festet til en magnet vil bidra til å fjerne det smale og dype reiret fra metallspon.
47) hvis du trenger å sage en rundpinne på langs, gjøres dette arbeidet mest hensiktsmessig ved hjelp av en mal den er laget av et metallrør med et spor i midten, diameteren er valgt slik at malen glir lett langs pinnen.
48) hvis spikeren ikke holder godt i veggen, ta den ut av stikkontakten, pakk den inn i avispapir flere ganger, fukt den og sett den inn igjen, avisen tørker og spikeren fester seg godt til veggen.
49) for å henge opp hyller, bruk et stykke kobber- eller aluminiumsrør med en langsgående sliss som en dyvel, krymp den, sett den inn i det borede hullet og stram skruen.
50) tunge hyller er opphengt med bolter. Hull med margin stanses i veggen og bolter sementeres inn i dem, og etterlater fremspring med gjenger. Hyllene er sikret med muttere, som om nødvendig er innfelt og sparklet.
En dacha blir virkelig en dacha bare når et hus dukker opp på den. Så bygg landsted- hovedoppgaven for enhver eier av en sommerhytte. Du kan selvfølgelig ta kontakt byggefirma, og byggingen av et landsted med egne hender vil bli fullført om bare en måned eller to. Men du kan spare penger og få den mest verdifulle erfaringen i livet hvis du bygger et sommerhus med egne hender. Hvis du velger å bygge et billig landsted med egne hender, vil du finne rådene våre skissert i denne artikkelen nyttige.
Arealantall etasjer arkitektur
Når du begynner å bygge et sommerhus, vil du selvfølgelig bli veiledet av din økonomiske muligheter. Valg av materiale for konstruksjon, konstruksjonsteknologi, areal, antall etasjer, tilgjengelighet av visse tekniske systemer, utstyr og så videre. Men likevel, først må du bestemme hvor nøyaktig på nettstedet du skal plassere nytt hjem, hvilket areal og antall etasjer den vil ha.
Den optimale plasseringen for et landsted er når en av veggene i huset ligger ved siden av veien som går forbi. Dette er praktisk når du bygger et sommerhus - fordi du på denne måten ikke trenger å bære byggematerialer over hele området. Når det gjelder området til huset, avhenger alt av hvor mange mennesker det vil være designet for. Hvis arealet av tomten ikke er stort, og huset skal ha plass til flere personer, bør du umiddelbart planlegge et hus med loft. Konstruksjonen er enda vanskeligere en-etasjes hus, da ikke mye (tross alt, taket må fortsatt gjøres, det vil bare ikke være så høyt og skrånende), men forbruket byggematerialer på en-etasjes hus av et lignende område vil være mye større.
Den eneste, men viktige begrensningen når du bygger to-etasjers dachas eller hus med loft, er at et slikt hus må ha et høykvalitets, holdbart, fortrinnsvis murstein eller armert betongfundament. Når du merker og legger grunnlaget, må du på forhånd vurdere om du skal legge til en garasje og veranda til huset. Grunnlaget for dem kan lages senere, men det er bedre å legge det med en gang.
Materialer og teknologi for å bygge et sommerhus
Det neste trinnet ditt er å bestemme hvilken konstruksjonsteknologi du vil bruke og følgelig byggematerialer. Valget er ganske stort, men likevel kommer det ned til bare tre hovedalternativer.
Grunnleggende konstruksjonsteknologier
- bygge et murhus eller gass silikatblokk;
- rammekonstruksjon;
- bygging av et sommerhus fra tømmer eller stokker.
Det første alternativet lar deg bygge et mest mulig holdbart hus, spesielt hvis murstein er valgt. Men murbygning vil være dyrere i kostnad, og konstruksjonshastigheten er dårligere enn konstruksjonshastigheten ved bruk av andre teknologier.
Et gasssilikathus bygges raskt, er relativt billig, og bruk av armering i forbindelsessømmene mellom blokkene vil gjøre et slikt hus veldig sterkt og holdbart. Men den viktigste fordelen med gassilikat er utmerket varme- og lydisolering av huset.
Rammeteknologi for sommerhusbygging
Rammeteknologi gir mest høy hastighet bygninger. Ulempene med et slikt hus er at det vil koste litt mer enn et gasssilikathus og vil være minst holdbart. Imidlertid gir moderne materialer for rammehuskonstruksjon et tilstrekkelig nivå av styrke og holdbarhet, spesielt siden vi snakker om konstruksjonen av et landsted, og ikke en permanent struktur.
Når det gjelder konstruksjonen av taket, så i konstruksjon på sommerhytte De bruker de samme takmaterialene - skifer, inkludert elastisk skifer, takjern av forskjellige profiler, fliser, metallfliser, myke fliser. Fokuser kun på din smak og evner!
Kommunikasjon og husholdningsutstyr til hagen
Hvis du bygger et moderne landsted, hvor det skal være komfortabelt når som helst på året og uansett vær, må du utstyre det med passende kommunikasjon. Dusj og toalett ute? Da er alt enklere. Men hvis du vil ha alle husholdningsfasiliteter under ett tak, må du:
Utstyr et kloakksystem
Vanligvis, i forhold til dacha-konstruksjon, er sentral kommunikasjon ikke gitt, så autonome kloakksystemer vil komme til unnsetning.
Vann
Hvis det er en rennende vannforsyning og det er en jevn tilførsel av vann, flott. Hvis ikke, er det sikreste alternativet å bore din egen brønn og installere et pumpesystem i den. Gleden er ikke den billigste, men tro meg, å ha autonomt vann er veldig praktisk!
Det er mange alternativer. Den mest tradisjonelle er en komfyr, men dette er mye mer komplisert og dyrt enn å kjøpe en dobbeltkrets kombinasjonskjele som går på gass, elektrisitet og til og med kull eller ved. En slik kjele er ekstremt praktisk å bruke og vil gi oppvarming til huset og forsyne det med varmt vann.
Strømforsyning
Alt er standard her, men du må huske at de fleste dacha-kooperativer går over til å betale for strøm med meter. Så du bør umiddelbart installere en sertifisert elektrisk måler, og bruke energisparende enheter i nettverket, hvis mulig.
Reparasjon av tørre gulv
Hva skal jeg gjøre hvis det har dannet seg hull og det er umulig å stramme gulvet igjen av en eller annen grunn? I dette tilfellet kan du gjøre følgende
1. Bruk en kjeglekutter festet til en drill for å avfase gulvbordene. For å sikre at gapet i den øvre delen er likt i hele lengden, kan stoppstenger festes til boret ved hjelp av klemmer
2. Hvis sprekkene er brede nok, planlegg plankene med passende form (seksjon) og. Etter å ha smurt dem med epoksylim, hamr du dem inn i sprekkene. Hvis sprekkene er smale, skal strimler av polyuretanskum 1,3 ganger tykkere enn sprekkens bredde forsegles i dem.
3. Fortynn epoksyharpiksen ved å tilsette fin sagflis (tre ganger mer i volum enn epoksylim), varm blandingen til 30-35°C for å øke flyten, og fyll sprekken med den resulterende sammensetningen slik at den stikker over gulvnivået.
4. Bruk et plan for å høvle den utstikkende delen av sømmen til gulvnivå
I tillegg til hovedformålet med å tette sprekker, sikrer dette bindingen av brett til en masse, noe som øker gulvets stivhet betydelig og gjør det mulig å vaske det uten frykt for at vann renner under brettene. De forseglede sprekkene kan enkelt males med hvilken som helst gulvmaling.
Hvis spaltene er veldig brede, er det billigere å tette dem med lameller For å gjøre dette spikret man en stoppkloss på siden av spalten slik at kutteren danner et jevnt spor med skrå vegger. Dette sporet er belagt med epoksylim og en lekt av passende form og størrelse, smurt med lim, er også drevet inn i den. Lekten er i tillegg sikret med tynne lange spiker, ikke slått helt inn Dagen etter, når limet har polymerisert, trekkes spikeren ut av lekten, og lekten høvles til gulvnivå. Etter denne operasjonen er det tilrådelig å male gulvet.
Fra råtømmer
Jeg så gjennom mange publikasjoner om bygging av hus fra tømmer, men i ingen av dem så jeg nyansene, uten kunnskap om hvilke en individuell utvikler ikke kan lage et kvalitetshus. Det ser ut til, hvilke spesielle triks kan det være? Å bygge et hus av tømmer er tross alt som å leke med et byggesett for barn. Bjelketykkelse det samme, men det vesentlige "men" er det. at tømmeret er saget av tre som allerede har feil - langsgående krumning, spiralform, ujevne groringer, krølling av treet... Det er dette som skaper forutsetninger for ujevn tørking, spesielt siden stokkene ofte ikke er helt tørket før saging og tømmeret vil tørke på eiers plass eller i stablet eller i konstruksjon.
Så der går du! Det er best å kjøpe tømmer når fundament og sokkel er satt opp og det er på tide å montere det. Det medbragte materialet kan ikke tørkes i en stabel - det vil oppstå mye avfall og store vanskeligheter ved montering av huset. Derfor er det nødvendig å legge veggene så raskt som mulig, før bjelkene begynner å bevege seg koblet til hverandre og presset ned av vekten av hele bygningen har ikke frihetsgrader og generelt tørker jevnt, uten dannelse av ujevne vegger.
Glass og verktøy
Hvis fabrikkhåndtakene på meiselen er blitt ubrukelige på grunn av intensivt arbeid, skjær dem ut i bjørk til tre brøt ikke fra slagene fra hammeren under drift, smør den øvre delen av håndtakene med et tynt lag epoksylim og vind 2-3 cm glasstråd tur til sving. En glassfiberbandasje er mye mer pålitelig enn en metall - ettersom de øvre svingene på trådene går i stykker, vil de nedre holde veden og forhindre at den splittes.
Glassfiberbandasjer på håndtakene til spader, river og andre hageredskaper, samt på håndtakene til hammere og økser, øker deres styrke og levetid betydelig.
Basert på materialer fra magasinet "DOM"
- Verdien av et nettsted bestemmes av tre hovedfaktorer: plassering, plassering, plassering. Pris og verdi er ikke identiske begreper.
- Det er bedre å bo på et dårlig sted med gode naboer enn på et godt sted med dårlige.
- Bygg et lite, rimelig tilstrekkelig hus. I de fleste tilfeller fører byggingen av "palasser" til uferdig konstruksjon, hull i budsjettet og dårlig helse.
- Ethvert stygt hjem er en tapt sjanse til å gjøre verden til et bedre sted. Det er mer prestisjefylt å bo i lite hus«smakfullt» enn i en enorm «transformatorbod».
- Hvis du virkelig trenger et stort hus, men ikke har penger til å bygge det, ikke kast bort tid og penger på "provisoriske" bygninger. Tenk på hvordan du bygger ditt fremtidige hjem i etapper. Dette kan være veksten av huset både horisontalt og vertikalt.
- Når du velger et prosjekt, prøv å unngå overdreven originalitet. Husk at alt vakkert og rimelig allerede er bygget før deg. Din oppgave er å velge den husdesignen som er best egnet for naturen og typen yrke og tilpasse den til landskapet og omgivelsene på nettstedet ditt.
- Bygg ditt drømmehus! Å velge et husdesign utelukkende av praktiske og rasjonelle grunner vil uunngåelig føre til skuffelse i fremtiden.
- Ikke engasjer tjenestene til en arkitekt som aldri har eid sitt eget landsted.
- Huset skal ha sin egen "personlighet" og tilhøre en av de kjente arkitektoniske stilene. Husk at en haug med geometriske former, teksturer og farger oftest ikke tilhører en ny og original arkitektonisk stil, men til en lenge kjent og veldig utbredt stil kalt "dårlig smak".
- Utformingen av huset og utformingen av lokalene bestemmer det utseende, og ikke omvendt.
- Unngå "nyeste, banebrytende og eksperimentelle" design og teknologier. Nye teknologier er ofte uprøvde og banebrytende design går raskt av moten.
- Når du velger materialer og teknologier, sjekk om de er sertifisert for individuelle boligbygging i de landene hvor staten virkelig bryr seg om helsen til medborgere.
- Multipliser det planlagte budsjettet for å bygge et hus med 1,5-2 og få en ide om de reelle byggekostnadene.
- Multipliser den planlagte byggeperioden til huset med 1,5 og få en ide om den faktiske byggeperioden (hvis alle pengene til bygging i henhold til paragraf 9 er tilgjengelige).
- Den eneste måten å unngå defekter og feil ved bygging av et hus av et innleid team av byggherrer (firma) er å konstant være personlig tilstede på byggeplassen eller ansette en uavhengig ekspert til å følge konstruksjonen.
- Den farligste misforståelsen er å tro at byggherrene dine vet alt om å bygge hus og vet hvordan de skal bygge dem.
- Hastverket med å bygge et hus er gunstig bare for utbyggerne - på denne måten kan de tjene mer.
- Ved å overlate kjøp av byggematerialer til utbyggere, vil du i de fleste tilfeller betale for mye fra 5 til 30%.
- Unngå "gammeldagse" og oppfunne tekniske løsninger. Svar på evt teknisk spørsmål om konstruksjonsteknologier og -materialer finnes i instruksjoner og album med tekniske løsninger fra produsenter, i byggeforskrifter og forskrifter, retningslinjer for praksis og andre byggeforskriftsdokumenter.
- Husk at innenlandske er mer moderne byggeforskrifter og reglene er ofte utdaterte vestlige standarder. Hvis du leser på engelsk, se etter moderne internasjonale byggeforskrifter på Internett.
- Det er ikke fundamentet som «støtter» huset, men jorda som fundamentet hviler på. Først av alt, undersøk egenskapene til jorda under fremtidige hus, velg deretter den optimale typen fundament for de gitte jordforholdene og typen av huset ditt.