Introduction
Chapter 1. Installation of prefabricated and arrangement of monolithic reinforced concrete and concrete structures
Technical part
T-9-1. Installing columns on subordinate columns or on foundation slabs using a group conductor (frame-hinge indicator)
T-9-2. Installation of parapet panels up to 10 m2
T-9-3. Sealing open vertical joints wall panels
T-9-4. Cutting nairite tape and making insulating inserts - for sealing open vertical joints of external wall panels
T-9-5. Installation and removal of volumetrically adjustable metal formwork of beams and girders
Chapter 2
Technical part
T-9-6. Cutting robes
T-9-7. Arrangement of floors in rows
T-9-8. The device of a slipway and stands from two-rope bars
T-9-9. Movement, launching and installation of rows with hand winches
T-9-10. Launching the rows into the water and moving them by tugboat
T-9-1I. Wall cladding with boards
T-9-12. The device of cornices on ryazhevy walls
T-9-13. Miscellaneous works
Chapter 3
T-9-14. Sealing window openings with plastic wrap
T-9-15. The device of a shady canopy with an area of ​​30 to 50 m2
Chapter 4 Finishing work
T-9-16. High-quality oil painting of wall surfaces with a roller
T-9-17. Painting facades with organosilicon enamel with a roller
T-9-18. Wall cladding with asbestos-cement panels
Chapter 5
Technical part
T-9-19. Paint waterproofing
T-9-20. Plaster waterproofing on cold to hot asphalt mixes
T-9-21. Cast waterproofing
T-9-22. Gluing waterproofing
Chapter 6
Technical part
T-9-23. Drilling wells with the help of drilling rig MBS-1.7
T-9-24. Felling of the heads of reinforced concrete piles with one central prestressed rod
T-9-25. Vertical driving of steel sheet piles by vibro-pressing pilers
Chapter 7
Technical part
Section 1. Lining and lining of surfaces with acid-resistant piece materials on various binders
Technical part
T-9-26. Lining and cladding of surfaces with acid-resistant piece materials on silicate putty with simultaneous jointing with Arzamit putty
T-9-27. Lining and cladding of surfaces with acid-resistant piece materials on cement mortar
T-9-28. Lining of rectangular and cylindrical surfaces of apparatuses with graphite blocks on Arzamit putty
Section 2 Surface Finishing
T-9-29. Cutting the seams of the lining manually
T-9-30. Putty
Section 3. Preparation of materials for lining and surface finishing
T-9-31. Preparation of putty "Arzamit"
T-9-32. Preparation of putty based on epoxy resins
T-9-33. Preparation of putty based on epoxy resin combined with FA monomer (FAED)
T-9-34. Preparation of the composition of self-vulcanizing sealant
T-9-35. Manual preparation of epoxy compound with solvents in containers up to 40 l
Section 4. Protection of surfaces with paints and varnishes based on synthetic resins
Technical part
T-9-36. Applying a rust converter
Section 5. Vinyl work
T-9-37. Strengthening of vinyl plastic with fiberglass
Section 6. Pasting surfaces with roll and sheet materials
Technical part
T-9-38. Pasting the surface with plastic compound
T-9-39. Pasting surfaces with rolled materials on bituminous mastics
T-9-40. Pasting with chlorine cloth and fiberglass on synthetic resin compositions (reinforced paint coatings)
Section 7. Installation of monolithic floors
T-9-41. The device of monolithic self-leveling floors on a concrete base based on an epoxy compound
Section 8. Miscellaneous work
T-9-42. Peeling and teska of bricks by hand
T-9-43. Cleaning plastic and vinyl plastic sheets with electric brushes
Chapter 8. Mounting and dismantling of construction machines
Section 1. Installation and dismantling of tower cranes
Technical part
T-9-44. Installation of a tower crane KBK-160.2 with a lifting capacity of 3 - 8 tons from enlarged units
T-9-45. Dismantling of the tower crane KBK-160.2 with a lifting capacity of 3 - 8 tf into enlarged units
T-9-46. Loading enlarged units of tower crane KBK-160.2 motor vehicles and unloading them
Section 2. Installation and dismantling of cargo-passenger lifts
Technical part
T-9-47. Installation of mast cargo-passenger construction hoist PGS-800-16
T-9-48. Dismantling of the mast cargo-passenger construction hoist PGS-800-16
Chapter 9 technological pipelines
Technical part
T-9-49. Cleaning and filing the ends of stainless steel pipes with a grinder after air-arc cutting
T-9-50. Grinding and filing the ends of carbon steel pipes with a grinder or manually after gas cutting
T-9-51. Stuffing of valve glands
T-9-52. Bending of carbon steel pipes on a pipe bender at an angle of 90 degrees with high frequency heating
Chapter 10. Manufacture of structures and parts for electrical installations
Technical part
T-9-53. Assembly in blocks of sections of main busbars of alternating current ШМА-73
T-9-54. Installing the gear on the bracket and connecting the gear to the luminaire
T-9-55. Assembly in blocks of magnetic starters and installation of blocks in cabinets
T-9-56. Assembly of KL-1 boxes into blocks
T-9-57. Making sockets at the ends of water and gas pipes on the machine
T-9-58. Production of a pipeline from vinyl plastic pipes
Chapter 11
Technical part
T-9-59. Production of bolts from metal pipes (locksmith work)
T-9-60. Manufacture of anchor bolts from prefabricated blanks
T-9-61. Production of building brackets from finished blanks
T-9-62. Manufacture of fasteners (ruffs) from finished billets of strip steel measuring 20X6X120 mm using a pneumatic hammer
T-9-63. Making pins from finished billets of round steel with a diameter of 10 mm
Chapter 12 technological equipment
Technical part
Section 1. Installation of equipment for food, meat and dairy industries
1. Equipment for meat processing plants
T-9-64. Rod conveyor I1-FKSH
T-9-65. FUAM plant for skinning cattle carcasses
T-9-66. FSHN installation for skinning sheep and pig carcasses
T-9-67. Unit ATIM-2 for fine grinding of meat
T-9-68. Installation K7-FOE for singeing pig carcasses in the skin
II. Milk processing equipment
T-9-69. Drying and crushing unit SDA-250
III. Food industry equipment
T-9-70. Dough preparation unit L4-HAG
T-9-71. Bakery oven BN-50
Section 2. Installation of forging and pressing equipment
Technical part
T-9-72. Two-column crank press of closed (frame) type
T-9-73. Three Position Hydraulic Press (Four Column)
T-9-74. Hydraulic four-column press with sliding table and bridge
Section 3. Installation of devices and automation equipment
Technical part
T-9-75. Embedded structures (bypasses) for cold (hot) water meters
T-9-76. Selective vacuum device for pure gases
T-9-77. Selective vacuum device for dusty gases
T-9-78. Unified Cabinets
T-9-79. Brackets for installation of electric (electric motor) actuators
T-9-80. Unit for group installation of devices of the GSP system for measuring the regulation of pressure, rarefaction. flow and level
T-9-81. Installation of ducts in enlarged sections for laying plastic pipes, cables and wires
T-9-82. Structures for mounting devices on the wall

MINISTRY OF FUEL AND ENERGY OF THE RUSSIAN FEDERATION

RUSSIAN JOINT STOCK COMPANY "UES OF RUSSIA"

OPEN JOINT STOCK COMPANY
TsOTenergo

TYPICAL RATES AND PRICES
FOR CONSTRUCTION, INSTALLATION AND
REPAIR WORK

COLLECTION TV14-4

DEVICE ASSEMBLY AND DISMANTLING
BUILDING STRUCTURES
POWER PLANTS AND HYDROTECHNICAL
FACILITIES.

NUCLEAR POWER PLANTS

ISSUE 1

Moscow 1997

Developed by the Open Joint Stock Company "TsOT-Energo" of the Ministry of Fuel and Energy Russian Federation under the methodological guidance of JSC "Center for labor in construction" (TsTS).

The technology for the production of works provided for in the issue is agreed with the State Institute "Orgenergostroy".

	Rebar diameter, mm, up to	N. vr.	Rass.	№
4 -"-- 1 3 -"-- 1		42,3

Chapter 3 . Reinforcing works

§ TV14-4-1-6 .Installation of spatial reinforcing cages

Guidelines for the application of standards

The standards provide for the installation of prefabricated reinforcing cages in mounted wall cells on the lining of the reactor compartment.

The production of reinforcing cages is not taken into account by the norms and is paid additionally.

Composition of the work

1 . Installation of reinforcing cages. 2. Reconciliation. 3. Participation of a reinforcing man when fixing reinforcing cages by welding.

Norm of time and prices for 1 ton

The composition of the chain of fitters	Weight of frames, t	N. vr.	Rass.	№
5 bits - 1 3 -"-- 2	up to 2	5,9
	St. 2	4,7
	to 10	1,3
	St. 10	1,2

§ TV14-4-1-7 .Installation of rebar with individual rods

Guidelines for the application of standards.

The norms of the paragraph provide for the installation of reinforcement with separate rods in the walls and ceilings of the reactor compartment.

Harvesting of reinforcement bars is not taken into account by the norms and is paid additionally.

The fastening of the rods during installation is carried out by welding. Welding is not taken into account by the norms of the paragraph and is paid separately.

A. Installation of fittings with separate rods in the walls of the reactor compartment.

Composition of the work

1 . Installation of reinforcement with individual rods with the installation of stops to fix the design position. 2. Participation of a fitter when fixing fittings by welding.

Table 1

Norms of time and prices for 1 ton

The composition of the chain of fitters	Rebar diameter, mm, up to	N. vr.	Rass.	№
4 -"-- 1 3 -"-- 2		18,8
		15,6
		9,4
		8,1

B. Laying reinforcement with separate rods in the ceilings of the reactor compartment

Composition of the work

1 . Laying and alignment of concrete pads. 2. Installation of reinforcement with individual rods. 3. Participation of a fitter when fixing fittings by welding.

Norms of time and prices for 1 ton

The composition of the chain of fitters	Rebar diameter, mm	N. vr.	Rass.	№
5 bits - 1 3 -"-- 2	up to 12
	up to 20	18,4
	up to 28
	up to 32	11,8
	up to 36	10,7

Approved

Decree

State Committee the USSR

on labor and social issues

and the Secretariat of the All-Union Central Council of Trade Unions

Validity -

before 1989

STANDARD REGULATIONS

WORKINGS FOR MANUAL WORK IN FIELD AND VEGETABLE GROWING

This collection contains typical production rates and prices for handmade on snow retention, preparation and application of fertilizers, cultivation of grain, leguminous, technical, fodder, melon crops; cultivation of vegetables in protected and open ground, as well as seed production of vegetable crops.

Standard output standards are approved by the Decree of the State Committee of the Council of Ministers of the USSR on labor and wages of February 2, 1977 N 36 and the Decree of the State Committee of the USSR on Labor and Social Affairs and the Secretariat of the All-Union Central Council of Trade Unions of September 19, 1984 N 276 / 17-79.

Typical production norms were developed by the Central Republican Regulatory Research Station of the Ministry Agriculture RSFSR, the Central Republican Agricultural Regulatory Research Station of the Ministry of Agriculture of the Ukrainian SSR and the Laboratory of Labor Standards in Agriculture VNIESKh of the USSR Ministry of Agriculture with the participation of regulatory research organizations of the USSR Ministry of Fruit and Vegetable Economy, the USSR Ministry of Food Industry under the methodological guidance of the Central Bureau of Labor Standards .

Validity period of standard production norms - until 1989.

Provision of intersectoral normative materials on labor is carried out at the centralized request of ministries and departments.

A COMMON PART

1. Standard production rates for manual work in field and vegetable growing are recommended for use in state agricultural enterprises, regardless of their departmental subordination, as well as in collective farms, and are intended to standardize the labor of workers engaged in manual work in field and vegetable growing.

2. The following materials are the basis for the development of standard norms:

a) photochronometric observations;

b) technical calculations in accordance with the accepted formulas and methods for determining the norms;

v) specifications tools used in crop and vegetable growing, equipment mechanisms;

d) the results of the analysis of the organization of labor and measures to improve it.

3. Typical production rates are set for one performer based on a work shift of 7 hours (with a 6-day working week) and 8.2 hours (with a 5-day working week).

Standard production rates can be used to standardize labor in the work of performers using the collective contract method. With this form of organization and remuneration of labor, on the basis of these norms, the volume of work, the wage fund, the number of workers in manual work, collective prices for final products, the dimension of labor participation rates for all categories of workers - members of the team, are determined, as well as remuneration of workers is made, recruited to work in the team from outside.

Output standards for work with harmful working conditions in accordance with the approved by the State Committee for Labor of the USSR and the All-Union Central Council of Trade Unions "List of industries, workshops, professions and positions with harmful working conditions, work in which gives the right to additional leave and shortened working day" are set for a 6-hour working day and are indicated in the notes to the tables of the normative part of the collection.

4. Standard production rates take into account the time for preparatory and final work, maintenance of the workplace, rest and personal needs of the performer.

5. The categories of work in this collection are indicated in accordance with the "Handbook on the billing of horse-hand work in crop and livestock farms and other state enterprises of agriculture, water, forestry and agricultural machinery", approved by the Decree of the State Committee of the Council of Ministers of the USSR on labor and wages payment of December 26, 1972 N 364 and agreed with the All-Union Central Council of Trade Unions.

6. The production rates in the tables of the collection are set for the most common conditions for the performance of work.

A brief description and procedure for performing the work are indicated in the relevant sections and tables of the normative part of the collection.

7. The limits of numerical indicators given in the collection (length, width, diameter, mass, volume, etc.), in which "to" is indicated, should be understood inclusive.

8. Prior to the introduction of standard output norms, it is necessary to bring the organizational and technical conditions in the farms in line with those projected in the norms and carry out production instruction for workers.

9. When introducing on farms more advanced than provided for in the standard norms for the organization of production and labor, work technology, tools, tools, devices that increase the productivity of workers, it is necessary to develop local production standards corresponding to higher labor productivity and introduce them into in the prescribed manner.

REGULATORY PART

MINISTRY OF FUEL AND ENERGY OF THE RUSSIAN FEDERATION

RUSSIAN JOINT STOCK COMPANY "UES OF RUSSIA"

OPEN JOINT STOCK COMPANY
"TSOTENERGO"

TYPICAL RATES AND PRICES
FOR CONSTRUCTION, INSTALLATION AND
REPAIR WORK

COLLECTION TV 17-13

INSTALLATION OF EQUIPMENT AND
PIPING ELECTRIC
STATIONS AND HYDROTECHNICAL
FACILITIES

RECONSTRUCTION AND TECHNICAL
REARMING

ISSUE 4

ELECTRIC INSTALLATION WORK

Moscow 1997

DevelopedOpen Joint Stock Company "TsOTenergo" on the basis of regulatory materials of regulatory research stations No. 2 and 60.

Introduction

1 . This issue contains standard norms and prices (TNiR) for electric installation work during the reconstruction and technical re-equipment of TPPs not covered by the current ENiR, VNiR and TNIR.

Model norms and issue rates are intended for the development of a new collection of departmental norms B 17 "Installation of equipment and pipelines of power plants and hydraulic structures, Issue 13. Reconstruction and technical re-equipment".

2 . The billing of works was carried out in accordance with the Unified Tariff and Qualification Handbook of Works and Professions of Workers, issue 3, section “Construction, installation and repair construction works”, and by profession “electric welder” - according to the relevant issues and sections of the ETKS.

3 . The collection contains only norms for the cost of working time. Rates are calculated by organizations that use the norms, based on the tariff rates applied in these organizations and the current tariff scale.

4 . Standard norms and rates of release can be applied in construction and installation organizations as local ones and put into effect by the administration in agreement with the trade union committee. If necessary, the level of standard norms can be adjusted to link them to local production conditions. The amount of change in the level of standard norms must be technically justified.

5 . The norms provide for the performance of work in accordance with the requirements of SNiP, the rules for the installation of electrical installations ( PUE ), specifications for the production and acceptance of construction and installation works, as well as with fire safety requirements.

6 . The rules of this issue provide:

preparing the welding machine for operation and setting the welding mode;

moving or carrying equipment and materials to the place of work or storage at a distance of up to 50 m;

performance of work at a height of up to 4 m from the floor level;

installation of simple scaffolds or ladders;

installation and removal of mechanisms, rigging devices;

slinging and slinging equipment;

manual dismantling of electrical equipment (except in special cases).

7 . The norms of this issue do not provide for and are paid separately:

production of decks and scaffolds;

installation of wiring to welding machines and assembly mechanisms;

installation of support structures for suspension of rigging devices during dismantling and movement;

work of crane operators.

8 . The norms of the collection are developed on the basis of the technical documentation of Elektromontazh JSC and Elektrouralmontazh JSC.

9 . When performing work on the subsequent installation of cable ducts and sections of cable shafts after dismantling under the conditions of reconstruction of the TPP, it is necessary to N.v. and Rass. for installation in new construction conditions, apply an average coefficient of 1.4.

10 . For brevity, the electricians on cable networks provided for by the composition of the links are referred to as "electricians".

§ TV17-13-4-1. Dismantling of KKB cable ducts

Scope of work

Removing boxes by hand.

When dismantling boxes

1 . Definition of cable ducts to be dismantled.

2 . Removal of boxes from metal structures.

For gas cutting

Cutting boxes with a gas cutter.

Table 1

The composition of the link

Profession and rank of workers	Removing covers from boxes	Dismantling of boxes	gas cutting
Electricians
4 bits
3 bits
2 bits
gas cutter
3 bits

0,95 .

2 . Dismantling of straight boxes.

table 2

Name of works

Meters

Box size

PO-0.2/ /0.5-3

PO-0.2/ /0.5-2

ZPO -0.2/ /0.5-3

ZPO -0.2/ /0.5-2

0,65/ /0,4-2

0,65/ /0,6-3

0,65/ /0,6-2

0,95/ /0,6-3

0,95/ /0,6-2

0,65/ /0,4-1

0,65/ /0,6-1

0,95/ /0,6-1

Dismantling

100 m of boxes

21,3

1 t

11,1

10 boxes

1 t

gas cutting

100 m of boxes

17,3

17,3

20,5

18,6

23,5

18,6

23,5

1 t

10 boxes

1 t

3 . Dismantling of corner boxes.

Table 3

Norms of time and prices for meters indicated in the table

Box size	Name of works
	Dismantling		gas cutting
	Meters
	1 box	1 t	1 box	1 t
UVP-0.2/0.5	0,92		0,19
UVP-0.2/0.5	0,99	38,8	0,24
UNT-0.2/0.5
ZUVP-0.2/0.5		33,3
ZUNP-0.2/0.5
ZUTP-0.2/0.5
UV-0.65/0.4			0,52	10,5
UN-0.65/0.4
UTV-0.65/0.4
UTN-0.65/0.4
UV-0.65/0.6		21,6	0,63
UN-0.65/0.6
UTV-0.65/0.6
UTN-0.65/0.6			0,68
UTV-0.95/0.6		18,8	0,85
UTN-0.95/0.6
UV-0.95/0.6
UN-0.95/0.6

Note. Cable boxes are intended for scrap.

§ TV 17-13-4-2. Dismantling of KP type cable ducts

Scope of work

When removing covers from boxes manually

Removing covers from boxes manually.

When dismantling boxes

1 . Definition of cable ducts to be dismantled.

2 . Removal of boxes from metal structures.

For gas cutting

Cutting boxes with a gas cutter.

Table 1

The composition of the link

Profession and rank of workers	Removing covers from boxes	Dismantling of boxes	gas cutting
Electricians
4 bits
3 bits
2 bits
gas cutter
3 bits

1 . Removing covers from boxes manually.

Time limit and price for 10 caps 0,38 .

2 . Dismantling of straight boxes.

table 2

Name of works	Meters	Box size
		0,05/ /0,1-2	01-0,1/ /0,1-2	02-0,1/ /0,1-2	01-0,1/ /0,2-2/	02-0,1/ /0,2-2	01-0,15/ /0,3-2	02-0,15/ /0,3-2	01-0,15/ /0,4-2	02-0,15/ /0,4-2
Dismantling	100 m of boxes		17,5		20,5				27,5
	1 t	26,7	23,3	21,9	18,6		15,6		14,5
gas cutting	100 m of boxes
	1 t	10,8

3 . Dismantling of corner boxes

Table 3

Norms of time and prices for meters indicated in the table

Box size	Name of works
	Dismantling		gas cutting
	Meters
	10 boxes	1 t	10 boxes	1 t
KUV-0.05/0.1
KUHN-0.05/0.1
KUT-0.05/0.1
KUV-0.05/0.1-45
KUHN-0.05/0.1-45
KUT-0.05/0.1-45
KUV-0.1/0.1
KUT-0.1/0.1
KT-0.05/0.1
KUHN-0.1/0.1
KUHN-0.1/0.1-45
KUHN-0.1/0.2-45
KUT-0.1/0.1-45
KT-0.1/0.1
KUHN-0.1/0.1
KUV-0.1/0.2
KUV-0.1/0.1-45
KUT-0.1/0.2				46,1
KUV-0.1/0.2-45
KUT-0.1/0.2-45
KT-0.1/0.2				42,2
KUHN-0.15/0.3
KUV-0.15/0.4
KUV-0.15/0.3-45
KUT-0.15/0.3				36,9
KUV-0.15/0.4
KUV-0.15/0.3-45
KUT-0.15/0.3-0.45
KUV-0.15/0.4-45
KT-0.15/0.3
KUHN-0.15/0.4-45
KUT-0.15/0.4-45
KUT-0.15/0.4				32,7
KT-0.15/0.4		47,2

Note. Cable boxes are intended for scrap.

§ TV 17-13-4-3. Dismantling of cable shafts

Scope of work

When dismantling

1 . Definition of sections to be dismantled.

2 . Removal of sections of cable shafts from installation sites.

For gas cutting

Cutting sections of cable shafts with a gas cutter.

The composition of the link

Electrician 4th category. - one

Electrician 3rd category - one

Electrician 2nd category. - one

Gas cutter 3 bits

Table 1

Norms of time and prices for meters indicated in the table

Standard size of cable shaft section	Name of works
	Dismantling		gas cutting
	Meters
	1 section	1 t		1 section	1 t
KVG-400	0,39			0,32
ShK-03/400	0,53			0,35
ShK-03/650	0,61			0,38
ShK-02/400	0,64
ShK-02/650	0,76			0,41
ShK-01/400
ShK-01/650				0,44
KShZ-A-2000				0,53
KShZ-AL-2000
KSHOZ-A-2000
KSHOZ-AL-2000
KShZ-A-2500
KShZ-AL-2500
KSHOZ-A-2500
KSHOZ-AL-2500
KShZ-B-2000
KShZ-BL-2000
KSHOZ-B-2000
KSHOZ-BL-2000
KShZ-B-2500				0,68
KShZ-BL-2500
KSHOZ-B-2500
KSHOZ-BL-2500

Note. Sections of the cable shaft are intended for scrap.