Step-by-step instructions for paying for utilities at the Sberbank terminal. Step-by-step instructions for paying for utilities in the Sberbank terminal How to pay for electricity in cash

How to pay for electricity through the terminal

Will come in handy for you

Payment terminal;

Receipt with sufficient;

Cash.

In order to make a payment, you need it in order to choose a serious choice on the extreme screen. Choose in the first paragraph "Housing and Utilities", or "Municipal payments" (depending on the big one), then choose your own energy

forge a company. For Moscow, this is Mosenergosbyt, in other areas energy companies... If you do not know exactly what company is working in your house, do not worry - his name should be written on the receipt.

Then you must enter the account number. It's written on the receipt. Be careful not to commit inaccuracies, like a number for a long time, than any other to re-learn during this time, that this again does not give a means to the second person.

During this time, it is necessary in order to enter the RR code - it is located in the right main corner of the receipt, produced from 3 quantities.

Subsequently, in order for how, as you entered the number of the code and the PP account and pressed the button further, the display without a doubt

there will be a window for choosing the amount of payment. Enter in this window or the number specified in the receipts, or the amount calculated by you on the basis of the counter symptom. Remember that, unlike the operator in the Savings Bank, the device does not accept a coin and is not protected, for example, the amount must be repeated up to 10 rubles.

During this time, if you are sure that everything is correct, press the button further.

on this moment the display should be a window "payment amount". All funds deposited will become showcased in this taking note of the working group, if there is no doubt about it.

In payment terminals Savings bank stable terminals of the company and how in terminals Qiwi and there is no Cyberplateau working group, in others, what it is, and the "payment amount" is highlighted at the bottom of the window, if the working group is very large and does not organize you, you will investigate this before entering funds and you can cancel the operation. If everything is in order, they bring up the names of an equal number entered, you have not yet figured out in the window for choosing the payment amount earlier. During this time, press the button to pay and wait for check lists.

Source: skateclass.ru

How to pay for electricity at the Sberbank terminal

It is permissible to pay utility bills through Sberbank at any branch of the institution. The bank also provided the opportunity to make payments through its network of ATMs and terminals.... At the same time, transactions can be performed both in cash and using a Sberbank bank card.

How to pay an invoice through Sberbank

Sberbank has an extensive network of branches and offices. Thanks to this, it is the leader among banks in transactions in this category.

Every consumer of services can make cash payments for housing and communal services. To do this, he only needs to contact the nearest cash office of the bank or use an ATM (terminal) of the institution. For the operation, the bank will take a commission in the amount according to the established tariffs *.

* Tariffs are indicated for Moscow. In regional offices, they are set depending on the location of the representative office, and vary within 1-3%

For its own clients (account and payment card holders) Sberbank additionally offers the opportunity to pay for utility services by bank transfer. To do this, you need to use the Sberbank Online service.

The functionality allows you to carry out the operation at any time of the day from anywhere in the world. In this case, you can use both a stationary computer and mobile phone(smartphone). In order to become a consumer of the service, you must be a client of a bank, have a debit (credit) card and register in the system.

To use the service on a mobile device, you need to install additional software. The capabilities of the service allow you to operate it on:

• mobile devices (smartphones) supporting Android and WindowsPhone systems.

Carrying out cashless payments utility bills through the online service is beneficial to the consumer with a reduced tariff rate. For example, in Moscow when paying utilities the commission will be 0.5% (EIRTs receipt) and 1% (electricity, gas). Carrying out similar operations through the bank's cash desk will be charged at rates of 1.5% and 2%, respectively.

An additional plus for the consumer (the bank's client) will be the participation of service users in the “Thank you from Sberbank” loyalty program. Each new client (registered in the system during the period from 16.03.2015 to 30.07.2015) and paid for utilities in the amount of 3.5 thousand rubles or more. receives a bonus. Members of the program can use discounts when making purchases from the bank's partners.

How to pay for a receipt through Sberbank Online. Step-by-step instructions for payment of housing and communal services

To carry out an operation using the online service, first of all, you need to go to the user's account. For this purpose, you need to enter a user ID and password. Next, confirm the entry with the code that came in the SMS message.

After that, the consumer can freely operate his accounts, including paying for utilities. These payments are made in the category "Housing and Utilities home phone"Section" Payments and transfers ".

Here you can pay for each service separately (water supply, gas, electricity, etc.). This is convenient for users who receive separate receipts for these services, or live in a private household.

Users who receive a single payment document(ENP) from the settlement center (EIRTs), it is necessary to pay for housing and communal services in the category "Rent".

While in the account, the user needs to go to the section "Payments and transfers".

In the menu that opens, in the category "Utilities and home telephone" select the service "electricity".

Next, search for an organization - a service provider. If the user knows the TIN or the current account of the company, you can enter these data. In the case of a search among all organizations in a specific region, you must enter the name of the service.

As a result, the system will display all the organizations in the region in the database. Already in this list, the user can select the required company - the recipient of the payment.

If the menu the right organization(service provider) is not displayed, you will need to enter the details yourself. To do this, in the "Payments and Transfers" section, go to the "Payment for services by details" menu and carry out the required operation.

Then you will need to fill in the required fields (they may vary depending on the supplier). The "Recipient" section is not available for editing (data is entered automatically by the system). It displays the name and details of the payee.

In the field "Payment details" you must enter:

• user's personal account number;
• the address data of the consumer of the service;
• meter readings (possible only from the 15th to the 26th of the month);
• the user's card (account) from where the funds will be debited;
• the amount to be paid.

The next step is to confirm the payment. To do this, you must enter the code received on the user's phone and confirm the operation.

After this operation, the payment will be sent for execution. The payment status will change when it is posted by the bank. A successful payment can be saved as a template (for use with subsequent payments) and printed.

You can also enter the details of the company yourself.

• customer's subscriber number: consists of 10 digits of the personal account and the supplier's organization code. They are indicated on the receipt;
• user data;
• payment amount.

In the "service" field, select either:

• payment "natural gas (without meter)";
• "Natural gas (with a meter)".

In the second option, the meter readings (previous and current) are indicated. The next step is to confirm the payment. To do this, you must enter the code received on the user's phone and confirm the transaction.

On the account page, the user needs to find a service provider. Its search is carried out in the category "Water supply". This item is located in the category "Utilities and Home Phone", the "Payments and Transfers" tab.

• service consumer data (personal number, meter readings, etc.);
• notification data - ENP receipts;
• payment card (account) number;
• amount of payment. It must match the one indicated on the receipt.

The next step will be to confirm the payment, the passage of which is similar to those already described.

Having chosen the service "Rent" in the category "Housing and Public Utilities and Home Phone", you need to find a service provider (EIRTS). You can also enter the details of the organization yourself (indicated in the receipt). Then follow the link with the name of the payee.

The next step is to fill out the payment form:

• indication of the card (account) number of the payer from which the payment will be made;
• entering the service consumer code (indicated on the EIRTS receipt) and the payment period (month and year);
• filling in additional fields of requisites.

Since the information in the EIRTS is synchronized with the Sberbank database, the amount of payment for utilities is automatically entered by the system. The consumer only has to confirm the payment. If necessary, the user can change the amount of the payment.

To make a payment, the user needs to search for its recipient - the organization of the FKR (capital repair fund). To do this, in the "Payments and Transfers" section, select the category "Utilities and Home Phone" and go to the "Rent" service. Then, having selected a suitable region, search for an organization that has provided the service.

You can also find the organization you need by entering its details (TIN, p / s). Next, the user needs to fill out a payment form.

The data of the personal and settlement (for savings) accounts of the consumer are displayed in the receipt for payment for the service. Personal account is individual for each of the owners of the premises and consists of 15 characters. The current account depends on the area of ​​residence and the chosen method of saving for overhaul.

The last step is to confirm your payment.

How to pay through a Sberbank ATM

1. Insert the card into the receiver and enter the code.
2. In the menu that appears, select the "Payments and Transfers" category.

3. The next choice will be the section "Utility bills".

5. The next step of the consumer will be the choice of the recipient of the payment - the organization that provided the service.

6. Using the tips of the machine, you must:

• enter the payer's code (displayed on receipts);

• specify the payment period (in the month-year format: MMYYYY);

• choose the type of debt.

7. After that, the ATM will offer to check the correctness of the entered data. If the user agrees with the displayed information, it is necessary to confirm the payment by pressing the "Pay" button. Next, the machine will offer a choice of payment option (amount with or without insurance). By pressing the corresponding key, the consumer makes a payment.

1. Please be careful when entering all the required payment details. Recheck the recipient's details (by checking them against those indicated in the receipt), your data (personal account, subscriber number, current account, etc.). It is almost impossible to return the funds transferred by mistake later.
2. When making utility payments, it is more profitable to use the online service. In this case, the tariffication of the bank's commission payment is much lower.
3. If you are a user of the Sberbank Online system, consider the option of connecting the Auto Payment for Housing and Utilities Services service. This will greatly facilitate all payments and save your time.

We have to pay bills for water supply, electricity, gas and other utilities every month, otherwise it is fraught with various fines, and in the worst case - disconnection. Not everyone knows that for payment it is not necessary to go to Sberbank or to the post office and stand in queues. You can just go to an ATM or terminal and pay for housing services using it, especially since you don't even need to have a bank card in your hands, enough cash. The procedure will not take long, especially if you use the following instruction.

1. To make a cash payment, you need to touch the terminal screen (if you are using a card, insert it into a special slot). At the ATM, instead click on the Payments and Transfers tab.
2. You will be taken to the Main Menu. We select the item "Search for a recipient of payments".
3. The device offers several options. If your receipt has a barcode, then this method is the most optimal, we choose it. We bring the receipt with the code to a special reading scanner and wait for the results of data processing. In this case, all payment data will appear on the screen automatically, you just have to pay.

How to pay for electricity through a Sberbank ATM: we disassemble step by step

If it is not possible to pay for it in full, you will need to indicate another one at your discretion. Then the button "Pay" is pressed. And all that remains is to pick up the check. When paying by plastic card there will be two checks: they will appear one after the other. The first is a confirmation of the withdrawal of funds from the card, the second shows that the service has been paid for.

When paying in cash, an operation is selected (we need payment for electricity), an energy-saving company is selected. Further, the personal account is carefully indicated. After that comes either agreement with the amount or input from the keyboard new amount to be paid. The button "Pay" is pressed, and banknotes are entered into the ATM. Upon completion of their acceptance, the ATM will also issue a check.

Banking and finance

PES monopolized the issuance of receipts - so that they could be purchased only in 18 PES branches (besides, not in all 70!). Later, he obliged everyone who has benefits to pay only at PES branches. And here is the third stage: to do so in order to pay for electricity in arbitrary other places, not counting the PES, would be unprofitable. Moreover, since January 1, there has been an increase in the tariff.

Your arguments about the fact that the PES is trying to "drive" the people into their own centers, besides this, are groundless. It is not for nothing that PES develops terminals, which are allowed to pay for com. electricity and services without any queues. In addition, you just as we know that PES develops a billing system, which completely relieves subscribers from the need to communicate with controllers, eliminates the possibility of inaccuracies and, thus, makes the payment of electricity the most comfortable.

Payment through the Sberbank terminal

Now - more specific examples how to pay for utilities through a Sberbank ATM with a card, or in the terminal (the terminal also accepts cash). The difference between the methods is that in order to pay for housing and communal services through the Sberbank terminal in cash, we will not use card authorization, but we will insert the money into the bill acceptor after entering the receipt data.

• Pay the rent through a Sberbank ATM;
• Make payments in favor of resource supplying organizations - for electricity, water, gas;
• Pay for commercial television, internet;
• Redeem receipts for security, video surveillance, overhaul, garbage collection, intercom, other utilities and private services;
• Pay taxes to the Federal Tax Service, traffic police fines, state duties;
• Pay for kindergarten, school lunches;
• Top up your mobile phone balance;
• Make a transfer to any card, etc.

Usually the commission is up to two percent. In Svyaznoy stores, you can pay on your own through the terminal, and no commission is charged from the user. If you pay through a communication salon with the help of a cashier, the commission is charged in any case.

For this, an application is installed on a smartphone. Then you need to enter the password issued by the bank that owns the application. After successful authorization, go to the "Services" section. In this section, you can select the service of replenishing a mobile account, transferring money, as well as paying a utility bill.

How to pay utilities through Sberbank

To make a payment, the user needs to search for its recipient - the organization of the FKR (capital repair fund). To do this, in the "Payments and Transfers" section, select the category "Utilities and Home Phone" and go to the "Rent" service. Then, having selected a suitable region, search for an organization that has provided the service.

Conducting non-cash payments for utility bills through an online service is beneficial to the consumer with a reduced tariff rate. For example, in Moscow, when paying for utilities, the commission will be 0.5% (receipt of the EIRTs) and 1% (electricity, gas). Carrying out similar operations through the bank's cash desk will be charged at rates of 1.5% and 2%, respectively.

Sberbank Online - how to pay for electricity

To pay for electricity through Sberbank Online, you first need to create Personal Area... To do this, you need to enter the number of the Sberbank plastic card, indicate the code received in the SMS, and then come up with a username and password. Registration in the system will take only a few minutes.

• Log in to SBOL with personal computer(laptop) by specifying a username and password and select a payment card;
• Install mobile app and register in it. The smartphone application essentially copies the Internet bank Sberbank Online, so all payments in it are made in a similar way.
• Use an ATM or Sberbank payment terminal. To enter the system, you will need to insert the card into the self-service device, specify the password and select the "Personal Account" item in the menu that opens. You can make a payment from a card or cash;
• Connect the Mobile Bank and pay for electricity using the card by means of messages to the number 900. To make a payment, you need to indicate in the SMS the name of the organization, account number, amount and the last four digits of the card from which the payment will be made. All data should be entered through a space.

An unofficial review of online banks of financial and credit institutions in Russia - how to register, rules for entering your personal account, making transfers

Sberbank Online will open the page for filling in the payment details according to the receipt, but since all information about the recipient company and intermediary banks has already been entered into the system database, we will only need to enter the subscriber's personal account. Click on the Continue button again.

This is what we will use to pay for the receipt. for electricity through Sberbank Online... First, we need to find the supplier in the list of recipient organizations. To do this, enter the TIN (or current account) of the company in the search field, select the region and click the button Find.

How to pay utility bills through the terminal

What is a payment terminal? This is a special device that allows the payer to independently perform Bank operations... Using the terminal, a person can transfer money, replenish electronic accounts, find out about the state of his bank account, repay loans, receive information and pay for many services, in particular utilities.

For the average consumer, the main advantage of this device is its step-by-step accessibility. This means, payment terminals located in most shops and public places. Also, their advantage is that with their help it is possible to pay for the services of the most different companies... In addition, you can transfer money to your account (both cash and non-cash), you can repay the loan without commission.

Payments and methods of accepting them

1) Insert the card into the payment terminal (when paying by bank card)
2) Depending on the interface
Select the menu item PAYMENTS IN OUR REGION
then PAYMENT BY BARCODE. Further, the screen for selecting the type of barcode will be possible. As a rule, a common linear (one-dimensional) barcode is common.
or find your organization in the menu items of the payment terminal. If it allows payment by a barcode, then a window will appear waiting for reading the barcode from the receipt. You can often see additional hints on the screen.
3) present the receipt to the terminal for reading. The scanner is usually located below the screen.
4) Wait for the receipt to be read. There will be a beep or just a follow-up screen will be displayed.
5) Compare the data of the organization displayed after reading the receipt on the screen with your payment.
6) Enter (if necessary) additional data. For example, meter readings (if you pay for a communal apartment).
7) Check the entered details.
Remember, although it all seems high-tech, that receipts are originally formed by people and they are the barcode, also ordinary people write reception scripts by barcodes. And as you know, people can make mistakes, so always check bank details, the amount of payment.
7) Complete the payment by clicking the PAY button.
8) Take the check and card. Always keep your receipt.

Yes, I hope so. Moreover, the National Payments Council is active in the direction of introducing a unified standard for printing a two-dimensional barcode. There is already a site sbqr.ru, where small organizations and SP can prepare receipts with a two-dimensional barcode. Prepared receipts fit the requirements of Sberbank

How do I pay for electricity? We heard about the appearance of the first information and payment terminals not very long ago.

Over the past time, they have managed to turn for clients from a miracle curiosity into faithful helpers who come to the rescue when performing a multitude of bank payments and operations. Our material is for those who are not averse to mastering the terminals.

Possibilities of information and payment terminals and ATMs of Sberbank

First of all, they are capable of performing various banking operations:

1. Repayment of loans from this bank.
2. Making a transfer from a card to deposit accounts or other persons.
3. Connecting and disconnecting " Mobile Bank"And" Auto payment "and many other functions.

It is also possible to pay for various services:

• payment of rent;
• replenishment of the mobile phone account;
• payment for the services of Internet providers;
• payment for satellite and cable television;
• settlement of accounts educational institutions and other organizations cooperating with the bank on a contractual basis.

State duties and fines of the traffic police using the terminal will also not be difficult.

How to pay for electricity through a Sberbank ATM - instructions

How to pay for light through Sberbank ATM?

So, we come close to the question of how a Sberbank ATM step by step? In this case, you must have a receipt for payment on hand. How to pay for light without a receipt? You can do without it by remembering your personal account number by heart.

When paying with a plastic card, you must enter the appropriate ATM window. After dialing the pin code, you will need to decide on a specific operation. Typically, electricity bills can be found in the section titled "Utility Bills".

An energy-saving company serving the payer's house must be selected. After that, all the numbers of the personal account are entered in the appropriate field. After completing these operations, you will be able to see the amount owed on the screen.

Its full, you will need to indicate another at your discretion. Then the button "Pay" is pressed. And all that remains is to pick up the check.

When paying with a plastic card, there will be two checks: they will appear one after the other. The first is a confirmation of the withdrawal of funds from the card, the second shows that the service has been paid for.

When paying in cash, an operation is selected (we need payment for electricity), an energy-saving company is selected. Further, the personal account is carefully indicated.

After that comes either agreement with the amount or entering a new amount from the keyboard to be paid. The button "Pay" is pressed, and banknotes are entered into the ATM. Upon completion of their acceptance, the ATM will also issue a check.

The difference between these two listed payment methods is that by paying in cash, you cannot deposit the amount down to the smallest detail, the ATM does not provide for the issue of change. By paying by card, the amount can be paid exactly.

Instructions for paying for electricity through the terminal

How to pay for electricity through the terminal?

Where else can you pay for light? To begin with, select the desired option on the terminal screen. This can be done in the section "Housing and utilities services" or "Utility payments". Then the required power company is specified. The next step is to enter the account number.

Then proceed with the selection of the payment amount. This figure can be taken from the receipt or calculated independently based on the meter readings. After making sure of the correctness own actions, you can click the "Next" button.

The next thing that will appear on the screen is the "Payment Amount" window. It will reflect the entire amount deposited. There is no commission in Sberbank terminals.

The bills are entered into the bill acceptor up to the number that was entered earlier in the window for selecting the payment amount. After pressing the "Pay" button, you should wait until the receipt is printed.

Helpful Information: It is best to always collect ATM-issued checks. This is safer and the check will confirm your payment. They will have to be preserved for three years. It is more convenient if they are pinned to the receipt.

Today, payment for electricity is provided in all main terminals and ATMs of Sberbank.

The advantage of this method is that there is no need to stand in queues, since there are enough such devices and you can make a payment at any convenient time. We hope that our material helped to answer the question of how to pay for electricity through a Sberbank ATM.