Download an empty estimate form for finishing work. Examples of standard documents for budgeting. What is the estimate of repair work
The most important stage design of any building or system is the compilation estimate documentation... The estimate allows the customer and the contractor to establish the contractual cost for the concluded contract, optimally plan and analyze the entire complex construction works, distribute monetary investments, as well as carry out interim financial calculations.
First, decide on the method for calculating the cost of the estimate. In modern construction, the base-index method is often used. The estimated cost of work includes three components: direct and overhead costs, planned savings. Direct costs are the sum of expenses for the purchase of materials, the operation of equipment, and the wages of workers. They are calculated in any of the chosen ways.
Every person knows that any business must begin with calculations. Getting ready to glue the wallpaper in the house - calculate what costs will be needed for wallpaper, glue, putty, painter's work. If you want to build a table with your own hands - calculate the cost of boards, screws, PVA glue.
When building a house, you must take into account all the construction stages and their costs. Such indicators are concentrated in the working draft in the section of the estimate documentation.
How to make an estimate for the construction of a house without loss and revision?
About how to make an estimate for the construction of a house is known to designers, estimators, foremen, and other categories of engineers and builders. Have some idea of this ordinary people, not related to construction work, but starting the construction of a dwelling. Their desire is clear: they do not want to overpay extra amounts. If a person is persistent and purposeful, it will not be difficult for him to carry out the calculations himself. Samples of estimates for the construction of a house are widely presented on the Internet.
Estimated documentation is prepared on the basis of calculations, in which items with indicators are presented:
- serial number;
- estimate and calculation numbers;
- names of the construction stage;
- the estimated cost, which consists of the costs of construction and installation work, the use of materials, and other costs;
- total estimated cost.
Estimated calculations signed by the compiler's management and the customer are considered monetary document, which is the basis for the actual performance of work, participation in a tender, etc.
When drawing up an estimate for the construction of a house, all important and minor positions are taken into account. Sometimes it seems to the customer that the inclusion of a particular expense item is not at all necessary. But in the course of construction, unforeseen, unaccounted for in the documentation, costs "appear". The customer understands this and puts in the documentation 5-10% for unforeseen overhead costs. This can be funds aimed at obtaining permits from fire authorities, gas workers, electricians, water suppliers and other permitting authorities, or other types of expenses.
An approximate sample of the estimate for the construction of a house made of wood covered with metal tiles
Let's try and we will acquaint you with a sample estimate for the construction of a house made of wood with an area of 150 sq.
Object name: wooden house
Technology: log construction
Total area: 150 sq.m
Total estimated cost: 1 million 630 thousand 244 rubles (1 630 244 rubles)
Base: project documentation, drawings
- 1. Conducting geological, hydrogeological, topographic survey work on the site for the construction of a house (sq. m) 200x100 = 20,000 rubles
- 2. Land work to remove the humus layer of the soil (cubic meters) 10x450 = 4500 rubles
- 3.
Digging a trench for a foundation with a width of 600 mm (cubic meters)
50x575 = 28 750 rubles - 4.
Manual trench leveling with soil compaction (m2)
22x689 = 14 960 rubles - 5.
Backfilling of sand and crushed stone into the ditch (m3) 12х1200 = 14,400.
This also includes the cost of the material 12x600 = 7200
In total for this position 14 400 + 7200 = 21600 - 6.
Installation, and after complete hardening, dismantling of the formwork (m2)
60x100 = 6000;
this also includes the cost of renting a formwork 60x250 = 15000;
total for this position 6000 + 15000 = 21000
- 7.
Tying longitudinal steel reinforcement D12 and transverse reinforcement D8 (m3). Consumption of 60 kg of rolled metal per 1 m3 of concrete is envisaged.
Work 20x1800 = 36000;
the need for fittings D12 and D8 20x60 = 1200 kg. If the price of reinforcement for 1 ton is 26,000 rubles, then the cost of the material is 1.2x2600 = 31200.
Total for 7th position 36000 + 31200 = 67200 - 8.
Fill concrete mix 20x2500 = 50,000;
the cost of concrete is 20x5000 = 100,000
The total cost of the 8th pos. 50,000 + 100,000 = 150,000 - 9.
Waterproofing vertical foundation walls (with hot bitumen applied twice) (m2) 80x150 = 12000
Cost of materials 80x45 = 3600
Total for 9th position 12000 + 3600 = 15600 - 10. Grinding logs with a plane (running m) 572x66 = 37752
- 11. Finishing, 2-sided grinding of logs (m2) 572x400 = 228800
- 12. Corner alignment (pcs.) 8x1500 = 12000
- 13. Log roll-up (pcs.) 2х1500 = 3000
- 14.
Carrying out work on the disinfection of logs with special solutions (running meters) 580x15 = 8700
cost of septic tanks 580x20 = 11600
Total 8700 + 11600 = 20300 - 15.
Installation of a log house on a foundation (m2) 150x550 = 82500;
materials 150x1500 = 225000;
total for the 15th pos. 82500 + 225000 = 307500 - 16.
Double-sided curling of tow, (running m) 572x50 = 28600;
material 572x3 = 1716;
total for the 16th pos. 28600 + 1716 = 30316 - 17.
Double-sided caulking of a log house, (running m) 572x140 = 80080;
material 572x3 = 1716;
total for the 17th pos. 80080 + 1716 = 81796 - 18. Cutting out of window and door openings, installation of windows and doors (pcs.)
- 14x2000 = 28000;
material 14x2500 = 35000;
total for the 18th pos. 28000+ 35000 = 63000 - 19.
Installation of beams, installation of ceilings, subfloor laying (m2)
128x80 = 10240;
materials 5522.38x6.7 = 37000;
total for the 19th pos. 10240+ 37000 = 47240 - 20.
Clapboard cladding of walls, ceiling, roof, final flooring (m2) 390x325 = 126750
materials 7586.2x5.8 = 44000
only 20 pos. 126750 + 44000 = 170750 - 21.
Staining (m2) 144x50 = 7200;
paint and other materials 144x70 = 10080;
total 7200 + 10080 = 17280 - 22.
Assembling the roof with the installation of the battens (m2) 135x750 = 101250;
materials 5400x2.5 = 13500;
total 101250 + 13500 = 114750 - 23.
Installation of metal tiles (m2) 135x300 = 40500;
the cost of metal tiles and fasteners 135x350 = 47250;
total 40500 + 47250 = 87750 - 24. Finishing the basement with stone (m2) 22x2200 = 48400;
- 25.
Installation of entrance metal doors, 2 sets (m2) 2x3500 = 7000;
material 2x4500 = 9000;
total for the 25th pos. 7000 + 9000 = 16000
Estimated total: 1 630 244 rub
including:
- - for materials: 592 862 rubles
- - for work performance: RUB 1,037,382
As you can see, it is not very difficult to make an approximate estimate for building a house if you know the consumption of materials, standard prices and current prices. The article also provides a sample of estimates for a residential building made of gas blocks (see fig.).
Output
Everyone can calculate the construction costs. But specialists do it more skillfully and competently. Sometimes they overestimate the amounts for individual items. In order to adjust the indicators, the owners themselves can perform the calculations or seek the help of other organizations.
Instructions
To make an estimate, it is best to use the Microsoft Excel program. It has a very user-friendly interface that will help you not only calculate the total amount, but also add or subtract certain columns, or replace one value with another.
While holding down the left mouse button, count six columns to the right (up to cell F1). The number of lines should correspond to the number of items to be taken into account in the estimate.
Now write columns. The first is a number in order. Use No. to designate it. The second is the name. For example, when calculating here should be listed. The third is the cost per unit of goods (price per item). The fourth column is the number. The symbol for this column is "count". It is written in numbers, how many pieces of this or that name need to be taken into account.
The fifth column is the total cost. The amount for all items of the same name is entered into it. To subsequently automatically add up the total cost for all items listed in the estimate, do the following:
Select the entire column with the left mouse button;
Click on the right mouse button to display a table with actions;
Select "Format Cells";
There click on the first tab "Number";
Select "Numeric" or "Currency" format.
Now, after filling in all the cells, it will be possible to calculate the total amount. To do this, select the entire column and find the designation Σ (sigma) in the upper right corner. Click on this icon to add all the numbers in the desired column.
The sixth column is Notes. All additional information is written here. Where to buy the necessary items, what color they will be, delivery times, etc. To display the text correctly, do the following:
Select all rows of the sixth column with the left mouse button;
Click on the right mouse button to display a table with actions;
Select "Format Cells";
Click on the first "Number" tab;
Select the "Text" format.
Related Videos
Sources:
- Estimate for design work
An estimate is a document that takes into account the materials necessary for the production of work, their quantity and cost. The cost estimate may also include the cost of working with these materials, if you order their execution by a third-party organization. The estimate can be drawn up as a standard package of documents for each type of material and work with it, or it can be made in the form of costing and resources per unit of material. Estimate - the basis for determining costs and capital investments.
Instructions
Start the budgeting of the object with the preparation of local estimates for certain types of work. Local estimates are based on approved or negotiated prices. V local estimate the materials necessary for each type of work, the cost and the estimated need for them are indicated. In the final estimate for the object, all local estimates are taken into account, the cost of the entire object is calculated.
In the consolidated estimate calculation, give the enlarged and generalized indicators, take into account certain types of costs in it - for the purchase of construction equipment, work on finishing the premises, the cost of paints and varnishes, the preparation of a package for land plot, reimbursement of expenses for site clearance and demolition of buildings and structures.
To draw up an estimate, in addition to special construction education, necessary to assess the composition and scope of work, the number and range of building materials, you will need Excel spreadsheets or special programs for budgeting. You can find them in, many of them are free. The databases that are built into this special software already contain the main types of work, their cost, Construction Materials and their consumption rates, etc. There is a possibility of data correction, input new information.
In the event that the building object is large, it is better to divide the estimate into stages, which will be paid separately, as it is completed. Provide in the estimate overhead costs, which include the maintenance of the administrative level of the contractor's company and the cost of transporting construction materials. Consider the percentage on additional expenses that are difficult to foresee right away.
Take into account in the estimate all the costs for the implementation of this project, make a calculation of the necessary Money, determine the cost of wages, calculate the cost of building materials.
Related Videos
Local estimate is the primary estimate document. They are made up for certain types of work and costs for each building object: buildings, structures, general site works. The basis for calculating the local estimate is the scope of work and the necessary materials, which are determined during the development working documentation and drawings.
Instructions
Divide the costs that are taken into account in the local area into four groups: construction, assembly work, cost and equipment, other costs. Based on the working documentation, determine the upcoming scope of work, the range and quantity of the required tools, inventory, equipment and furniture. Select the estimated standards in force for the current period and take into account market value equipment, furniture, inventory and free prices and tariffs for building and finishing materials.
Determine the type of work for which the estimate will be drawn up: special, internal sanitary-technical work, Finishing work, internal electrical work, vertical planning, purchase of tools and equipment, etc. If the object is complex and large, the construction of which is divided into start-up complexes, several local schemes can be done for the same type of work.
In each local estimate, group the data into sections for individual elements of the structure, type of work and devices in accordance with the technological sequence of work. In addition to construction work, the sections reflect work on laying communications, gas supply, ventilation and air conditioning, electrical work, instrumentation and automation, purchase and installation technological equipment... It is allowed to divide the object into underground and above-ground parts.
Consider direct costs, overheads, and estimated profits in your local estimate. Include in direct costs the wages of workers, the cost of operating the equipment, the cost of materials with a line-by-line decoding. Accrue overhead costs and estimated profit at the end of the estimate, after the total amount of direct costs. For the calculation of overhead costs, use the overhead rates provided by the current guidance documents.
To determine upcoming expenses for the construction of a new house or renovation of an apartment, a cost estimate is drawn up. Its cost directly depends on the quantity and quality of construction and finishing works and materials. A really competent and as close as possible to reality estimate can be a professional estimator or a construction company that claims to be a contractor. But you can try to make an estimate yourself.
Instructions
Determine the costs based on the amount of work to be done. In the estimate, reflect on only the cost of materials, but also the wages of builders, depreciation of used equipment, machinery and inventory. Take the initial data required for this in the existing SNiPs - approved building codes and rules. In them, a certain number of hours are allocated for each type of work, in accordance with this, calculate the cost of one hour of time. Determine the amount of overhead - wages and a percentage of the estimated profit. The cost of materials according to the estimate is 65-70%, 17% is salary, the remaining amount includes the cost of equipment, maintenance of the apparatus and unforeseen expenses.
When drawing up, at the initial stage, try to take into account all the nuances to avoid. For example, when building a house of a certain type, a specific foundation height is set. It is necessary that the zero level is defined correctly so that the foundation does not turn out to be too high or low. Take into account the climatic zone of construction - in the northern regions, communications are laid deeper so that they do not freeze through in winter.
See what you can save on. A significant difference can be when using different building materials - if, for example, instead of brick, wood is used for the construction of external walls. In addition, domestic building materials will also cost less, although their quality, at times, is not worse than that of imported ones, since they are produced using foreign technologies.
A well-made estimate should reflect all costs by 99.9%. But keep in mind that under farce-majeure circumstances, its cost may increase. We advise you to set aside at least 10% of the cost of the estimate for unforeseen expenses, so that the construction of your house or renovation of an apartment does not turn into a long-term construction.
Drawing up a detailed estimate is the key to successful construction. It is at the stage of preparation that you need to think about how much building materials will be needed, what work will have to be done, and what it is better to refuse.
Instructions
If you plan to build a house from scratch, make two estimates. In one, the amount of building materials will be calculated, in the other - the cost of construction work, interior and exterior decoration and communications. If there is no water supply, sewerage, electricity and gas on the site, prepare a third calculation, which will indicate the price for their connection.
Use Microsoft Excel for budgeting. Its user-friendly interface will help you calculate the total amount of costs, multiply or subtract individual columns, replace one value with another.
For tables for estimates, hover over the top-left cell. Its symbol in the program is A1. Hold down the left button on the computer mouse. Move the cursor to the right and count six columns (up to cell F1). Make as many lines as there are items or services in the estimate.
Name the columns. The first is a serial number. Mark it with the symbol No. The next is the name (name or service). For example, when calculating a construction, there should be a list of materials. And when carrying out communications - types of work. The third is the price for one piece or service. Next is the column "quantity" or "quantity". Write down in numbers here how many products or services will be needed to complete the steps to repair or build a house.
Column number five is the total cost. Enter here the amount for all products or works of the same name. To total price afterwards folded automatically, do the following:
Press the right button to bring up a window with actions;
Find "Format Cells";
Specify "Number" or "Currency" format.
Now, having filled in all the cells, you can withdraw the total amount. Just select the entire bar and look in the upper right corner for the Σ (sigma) icon. Click on it to sum all the values in the desired column or row.
In the sixth column, place your notes. Record any additional information here. Where to buy the necessary materials, their size, color, etc. In what time frame should the work be completed. To display the text correctly, do the following:
Select the entire column by hovering the mouse cursor over the top cell and holding down the left button;
Click on the right button to bring up a window with actions;
Find "Format Cells";
Open the first insert "Number";
Specify the "Text" format.
Sources:
- how to make a commercial estimate
Estimating is one of the first and main stages of all construction and installation work. It is a calculation of the cost of construction, production of finishing and renovation works according to the approved project documentation taking into account real volumes. The estimate allows you to estimate their cost even before the start of work and adjust it by changing the technologies and used construction and finishing materials.
Instructions
In the preparation of estimates, a developed and agreed methodological and estimate base is used. It is based on the documents developed by the Gosstroy of Russia: a set of rules, guidelines and methodological documents. In these regulatory developments, prices are used as of 01.01.2000, which are adjusted to current prices using correction factors that take into account inflation.
When making an estimate, use the methodology (MDS 81-1.99) that was put into effect on March 9, 2004 and other MDS and guidelines Gosstroy RF. These regulations provide general information on the process of pricing in construction and provisions for determining its value.
In MDS 81-1.99, the main state methodological document, the recommended coefficients are given to take into account the influence of the working conditions. In addition, in it you can find unified estimate documentation and a decoding of the main types of work that relate to others.
In the total estimated cost, include the costs of construction (repair and construction) work, the cost of installation work, the cost of used equipment and inventory, and other costs. As a rule, construction and installation work is about 46-48% of the total cost of the estimate, the cost of equipment is 35-36%, other costs are 17-18%.
Checking the provided estimate is carried out not only in order to determine the correctness of the above calculations, it is necessary to control quality and find an opportunity to replace expensive work and materials with more economically profitable.
When analyzing and checking the estimate, in order to insure against fraud, first of all, pay attention to the compliance with the actual volume of work and the consumption rates of construction and finishing materials... Please note that direct costs are directly related to the amount of work performed, the necessary resources, estimated rates and prices for these resources. Direct costs include costs associated with the preliminary processing and preparation of some building materials and the cost of transporting them to the construction site. Overhead costs are indirectly determined as a percentage of the builders' payroll. Estimated profit is defined as a predetermined percentage in the composition construction products, it mainly goes to the development of production and social sphere contractor organization.
Related Videos
Sources:
- Ardzinov V.D. "How to draw up and check construction estimates"
Before starting repair or construction work, each owner calculates how much will be needed for repairs or construction. To get the exact amount of costs, make up an estimate, which includes all costs associated with future construction or repair work.
In the column "work", write down each item, what kind of work will be carried out. Consider everything from preparatory work to finishing work. If workers will be involved, write point by point what kind of work they will do. For example, scraping, painting, replacing windows, etc.
In the "Materials" column, indicate the required materials for each stage of work. For example, wallpaper, glue, linoleum, parquet, bricks, cement, etc. After you have detailed these points, proceed to estimate the costs for each of them. In each column opposite the building material, fill in the approximate quantity in pieces, meters, kilograms and indicate the cost of each item. Find out the cost of building materials on the Internet on special sites that specialize in the sale of such goods.
Repair is a rather costly event, for which you have to postpone some of the family budget... Since it is associated with discomfort for everyone living in the apartment, it is natural to want to do it with high quality, so that the next repair would take a long time. Therefore, it is important, before starting repair work, to make an estimate, calculate their cost and choose building materials in accordance with your financial capabilities.
What is the estimate of repair work
A competently drawn up estimate will allow you to correctly plan and organize repair work, bring them to the end as soon as possible with an optimal result. If the repair is not cosmetic, for which only finishing materials are required, your estimate should consist of two parts:- but finishing works;
- for consumables (rough) and finishing materials.
The purpose of budgeting is to calculate the need for materials and the actual cost of all repair work from dismantling old coatings to fine finishing premises of the apartment. Drawing up an estimate will allow you to avoid unplanned costs, however, as experience shows, it is still advisable to postpone another 10% of the estimated cost for them, which was calculated.
How to make an estimate for apartment renovation
Of course, it's not bad if you have some skills and an idea of \ u200b \ u200bthe repair, but you can calculate the approximate costs in any case. You can use the standard estimates that you find on the Internet, or based on them, make your own calculation using Excel spreadsheets. On the Internet, you can both paid and free estimate programs: Win-estimate, Turbo-estimator, DefSmeta, etc.Examine each room of the apartment and make a list of consumables and finishing materials that you need. Their approximate cost can be found on the Internet, catalogs of building hypermarkets, price lists of manufacturing companies. Make a list of construction, repair and finishing works, their cost can be determined by price lists construction companies or private teams that also offer their services via the Internet. Pay attention to the units in which the volume of work is measured.
You will need to consider the need for materials that are used for repair work, such as: primer, putty, dry plaster mixes, adhesive for ceramic tiles, wallpaper and other coatings, plumbing pipes, mixers and taps, filters, wires, sockets, switches, screws, nails, laminate backing, etc. For finishing you will need: wallpaper, facing and ceramic tiles, floor and wall decorative coatings; laminate, linoleum or parquet board, plasterboard, skirting boards, paint, windows and interior doors, etc.
Draw a plan of the apartment by hand to make it easier to take measurements, measure the surface areas of floors, walls, etc. with a tape measure. Calculate the required volumes of consumables. Please note that at least 5% will need to be added for marriage. Determine the scope of work and calculate their cost.
Building a house is a troublesome and costly business. Can you estimate how much it will cost you to build? Unfortunately, not every organization will undertake to tell you a certain amount, because it is very difficult to take into account all the nuances, pitfalls and unforeseen expenses during construction. That is why large construction companies have entire departments for the preparation of estimates. Those companies that do not have such departments turn to specialized firms.
The estimate is ...
House construction estimate - obligatory document, without which no contractor will start work.
As a rule, when building a building, the most costs are for building materials and payments to contractors. When calculating the cost of work, the following are taken into account:
- Scope of work;
- Technologies to be applied;
- Construction time;
- How the project will be financed (time frame and scope).
With the help of the estimate, the customer can control the construction time, the compliance of the planned work with those completed for a certain period.
Thus, the estimate for the construction of a house helps to streamline the schedule of work and the flow of finance during the work.
Often, having decided to build, clients submit applications for the preparation of estimates to several firms at once. The difference in the final cost of a building can be significant. The reason for this is different suppliers of materials, the number of workers, etc. By comparing estimates from different organizations for the same amount of work, you can objectively assess how you can save money wisely without compromising quality. ...
Important little things when making an estimate
Very often insignificant costs, which many do not even take into account, result in large sums... For example, solving bureaucratic issues can take up to 15% of the cost of an object. Also, transportation costs may seem like a trifle. Without taking them into account, you will be very surprised at the final cost of the building. However, the following items are required:
- Development of estimates for all items of documentation;
- If the estimate was made by another organization, mandatory verification, adjustment;
- The estimate for the construction of a house must be coordinated with expert organizations.
In addition to minor costs, a certain percentage of the funds spent are unforeseen expenses. In the documentation, they are given 2%, but very often real figure exceeds the planned.
How are estimates made
Due to the fact that the estimate is the most important financial document, its preparation is carried out according to certain rules. Some of them were approved back in Soviet times. For example, earlier the estimate was made by the organization that developed the project. She received 10% (of the cost of construction work) for and, accordingly, 1% for the estimate.
Sometimes this practice still occurs, but in general, today the processes are automated. Despite the presence of all kinds of programs, it is still more difficult to make estimates than in those days due to the variety of modern materials, technologies, construction companies, etc. Depending on the qualifications of workers and competition, you can overpay or save money. But the savings do not always benefit the quality.
Three methods of calculating estimates
Let's look at what types of calculation are and in which case it is better to use which type.
- The estimate for the construction of a house, compiled by the labor-intensive method... Often used for small buildings. The construction company tells the client the amount required to pay for their services, and the materials and their delivery are provided by the client. With this method, there are no written agreements and guarantees on the part of the contractor, but it does take place. ...
- Universal method... The document consists of a section where the main points of the work are listed in stages, as well as an appendix indicating the cost of materials, their transportation. Such an estimate for building a house will help you better control costs. Disadvantage - the document does not fully reflect some types of costs. For example, "overhead" means salaries, taxes, and several other items of expenditure.
- Expanded estimate... The name speaks for itself. Such a document must be drawn up for large-scale construction. The most detailed estimate for building a house reflects only the latest information on prices for building materials and other cost components. The documentation is easy to understand, even for an uninitiated person in subtleties.
Below are examples of estimates.
A sample of a ready-made estimate for repair and finishing work in an apartment with total area 64 m2 new building at the address: residential complex "microdistrict Fininsky-Potapovo 3A".
Estimate number 4 for the implementation of repair and finishing work
Estimate for the purchase of rough materials
| № | Name of works | Unit rev. | Qty |
Pricing in rubles |
Price in rubles |
| Dismantling work | |||||
| 1 | Ceiling joints (rustic) | r.m | 8 | 150 | 1200 |
| 2 | Dismantling of sockets, switches, lamps | PCS. | 12 | 75 | 900 |
| 3 | Dismantling the complete electrical panel | PCS. | 1 | 650 | 650 |
| Total: | 2 750 | ||||
| Construction works | |||||
| 1 | Laying of partitions made of tongue-and-groove blocks or foam concrete up to 100 mm thick | sq.m | 5,8 | 420 | 2436 |
| 2 | Metal jumper device | r.m | 2 | 280 | 560 |
| 3 | Bath screen device from blocks | PCS. | 1 | 1100 | 1100 |
| 4 | Steam insulation device ("penofol", "penoplex") balcony - floor, ceiling, walls | sq.m | 27 | 360 | 9720 |
| 5 | The device of coating thermal insulation "Akterm" | sq.m | 0 | 180 | 0 |
| 6 | Waterproofing joints adjacent to the street | sq.m | 6 | 185 | 1110 |
| Total: | 14 926 | ||||
| Painting and plastering works | |||||
| 1 | Plastering of walls (along beacons) up to 20 mm | sq.m | 25 | 385 | 9625 |
| 2 | Alignment of walls (as a rule) up to 10 mm - rooms, kitchen, corridor, pantry | sq.m | 154,5 | 200 | 30900 |
| 3 | Alignment of ceilings (as a rule) up to 10 mm kitchen, corridor, pantry, balcony | sq.m | 28 | 250 | 7000 |
| 4 | Sealing of ceiling joints (rustic) | r.m | 8 | 150 | 1200 |
| 5 | Surface primer (2 layers) ceiling, walls | sq.m | 0 | 60 | 0 |
| 6 | Surface finishing - ceiling, walls | sq.m | 0 | 45 | 0 |
| 7 | Putty ceilings for painting (complex of works) kitchen, corridor, pantry, balcony | sq.m | 28 | 350 | 9800 |
| 8 | Painting ceilings with w / e paint in 2 times | sq.m | 28 | 180 | 5040 |
| 9 | Putty of walls for painting (complex of works) | sq.m | 154,5 | 280 | 44805 |
| 10 | Painting walls with w / e paint in 2 times | sq.m | 154,5 | 140 | 21630 |
| 11 | Plastering of window slopes up to 300 mm | r.m | 15 | 260 | 3900 |
| 12 | Filling of slopes for painting (complex of works) | r.m | 15 | 280 | 4200 |
| 13 | Coloring of slopes with w / e paint in 2 times | r.m | 15 | 180 | 2700 |
| 14 | Installation of arched painting corners with sealing of seams and joints | r.m | 22 | 65 | 1430 |
| 15 | Painting of pipes with a diameter of up to 50 mm | r.m | 26 | 120 | 3120 |
| Total: | 145 350 | ||||
| Joinery and carpentry works | |||||
| 1 | Installing the door block (ready-made kit) | PCS. | 5 | 3000 | 15000 |
| 2 | Installation of slatted ceilings (up to 10 sq.m.) | sq.m | 4,4 | 880 | 3872 |
| 3 | Installation of plastic window sills up to 300 mm | r.m | 4,5 | 750 | 3375 |
| Total: | 22 247 | ||||
| Tiling works | |||||
| 1 | Wall cladding with tiles (size 250-250 mm) bath, toilet | sq.m | 25 | 850 | 21250 |
| 2 | Installation of the hatch | PCS. | 1 | 418 | 418 |
| 3 | Tile hatch device (with installation of the mechanism) | PCS | 1 | 1100 | 1100 |
| 4 | Laying tiles on the floor (size 300-300 mm) bath, toilet, balcony | sq.m | 10 | 700 | 7000 |
| 5 | Drilling holes in tiles | PCS. | 12 | 160 | 1920 |
| 6 | Grouting ceramic tiles (monocolor) | sq.m | 35 | 100 | 3500 |
| 7 | Facing of thresholds from tiles | r.m | 1 | 1000 | 1000 |
| Total: | 36 188 | ||||
| Floor arrangement | |||||
| 1 | Waterproofing floors in bathrooms | sq.m | 4,4 | 185 | 814 |
| 2 | Leveling screed device up to 3 mm | sq.m | 54,4 | 150 | 8160 |
| 3 | Laying laminate (with backing) | sq.m | 54,4 | 280 | 15232 |
| 4 | Installing the nut | r.m | 3 | 150 | 450 |
| 5 | Installation of skirting boards | r.m | 65 | 130 | 8450 |
| Total: | 33 106 | ||||
| Ventilation work | |||||
| 1 | Ventilation box insert | PCS. | 1 | 319 | 319 |
| 2 | Installation of a ventilation duct (up to 2 m) | PCS | 2 | 1650 | 3300 |
| 3 | Fan installation (with connection) | PCS. | 2 | 308 | 616 |
| Total: | 4 235 | ||||
| Heating | |||||
| 1 | Alteration of the heating radiator inlet assembly | PCS. | 3 | 4500 | 13500 |
| 2 | Heating radiator installation | PCS. | 3 | 1500 | 4500 |
| 3 | Removal / installation of a radiator for finishing work (without dismantling the bracket to a ready-made place) | PCS. | 3 | 500 | 1500 |
| Total: | 19 500 | ||||
| Plumbing work | |||||
| 1 | Temporary water supply device | set | 1 | 1650 | 1650 |
| 2 | Plumbing device | r.m | 6 | 600 | 3600 |
| 3 | Plumbing fixing | r.m | 6 | 120 | 720 |
| 4 | Installation of a fine filter with pressure regulator | PCS. | 2 | 1400 | 2800 |
| 5 | Collector installation (complex of works) | PCS. | 2 | 2000 | 4000 |
| 6 | Laying of pipes HGV (m / layer, p / propylene, p / ethylene) | r.m | 26 | 270 | 7020 |
| 7 | pad sewer pipes(PVC) | r.m | 5 | 330 | 1650 |
| 8 | Thermal insulation of pipes | r.m | 26 | 50 | 1300 |
| 9 | Installation of a storage water heater (boiler) | PCS. | 1 | 3300 | 3300 |
| 10 | Installation of a toilet bowl "Compact" | PCS. | 1 | 2805 | 2805 |
| 11 | Installation of "moidodyr" | PCS. | 1 | 3000 | 3000 |
| 12 | Mixer installation | PCS. | 1 | 850 | 850 |
| 13 | Installing a hygienic shower | PCS. | 1 | 850 | 850 |
| 14 | Installing a heated towel rail | PCS. | 1 | 3300 | 3300 |
| 15 | Bath installation | PCS. | 1 | 3700 | 3700 |
| 16 | Installing a bath mixer on a rod | PCS. | 1 | 1250 | 1250 |
| Total: | 41 795 | ||||
| Electric installation work | |||||
| 1 | Shtraba device up to 30x30 mm | r.m | 16 | 275 | 4400 |
| 2 | Sealing the shtrab | r.m | 16 | 35 | 560 |
| 3 | Cabling | r.m | 255 | 50 | 12750 |
| 4 | Installing the socket (with socket device) | PCS. | 33 | 300 | 9900 |
| 5 | Installation of electrical distribution board of the consignment note | PCS. | 2 | 650 | 1300 |
| 6 | Installation of automatic protection devices, diff.automatic devices, RCDs | PCS. | 12 | 250 | 3000 |
| 7 | Installation of a socket, switch | PCS. | 30 | 130 | 3900 |
| 8 | Installation of TV, Telephone, Internet sockets | PCS. | 3 | 180 | 540 |
| 9 | Installation of TV, Telephone, Internet splitter | PCS. | 1 | 280 | 280 |
| 10 | Installation of a built-in (spot) lamp | PCS. | 6 | 200 | 1200 |
| 11 | Electric underfloor heating installation | sq.m | 2 | 750 | 1500 |
| 12 | Installation of underfloor heating relay | PCS. | 1 | 350 | 350 |
| 13 | Marking of electrical installation sites (without project) | PCS. | 33 | 35 | 1155 |
| Total: | 40 835 | ||||
| Total for work: | 360 932 | ||||
| Total according to estimate No. 4: | 360 932 |
Table No. 1 of the consumption of rough material.
Table No. 1 on the consumption of construction and finishing rough material in an apartment with a total area of 64 m2 a new building at the address: RC "Finsky-Potapovo 3A" microdistrict.
Examples of samples of a table of accounting for the consumption of rough material
| № |
Name material |
pcs / m2 bags |
price |
general price |
| 1 | "Rodband" mixture with a layer thickness of no more than 2 cm | 87 | 370 | 32190 |
| 2 | Sand concrete M300 with a screed layer thickness of no more than 5 cm | 145 | 160 | 23200 |
| 3 | Plaster lighthouse 0.6 | 45 | 40 | 1800 |
| 4 | Plaster lighthouse 1.0 | 12 | 45 | 540 |
| 5 | Betokontakt "EURO" | 3 | 1350 | 4050 |
| 6 | Primer "Prospectors" | 5 | 450 | 2250 |
| 7 | Foam block No. 5 in pieces | 6 | 45 | 270 |
| 8 | Foam block No. 7 in pieces | 84 | 55 | 4620 |
| 9 | Waterproof gypsum plasterboard 12 | 2 | 370 | 740 |
| 10 | Plaster putty "Fugenfuehler" | 1 | 750 | 750 |
| 11 | Mounting glue for Perlfix blocks | 3 | 320 | 960 |
| 12 | Tile adhesive "Flizen" | 6 | 350 | 2100 |
| 13 | Self-leveling floor "Prospectors" | 8 | 320 | 2560 |
| 14 | Putty "Vetonit" LR + | 9 | 750 | 6750 |
| 15 | Spider web "Oscar" 50m2 | 1 | 1150 | 1150 |
| 16 | Profile 27/28 "Knauf" | 6 | 100 | 600 |
| 17 | Profile 60/27 "Knauf" | 4 | 130 | 520 |
| 18 | Finishing putty "Pro Form" | 1 | 1350 | 1350 |
| 19 | Suspension "Knauf" | 40 | 20 | 800 |
| 20 | Film density -150 | 60 | 50 | 3000 |
| 21 | Beams 50/50 planed | 3 | 200 | 600 |
| 22 | Planed board 150/20 | 3 | 300 | 900 |
| 23 | Trash bags | 120 | 10 | 1200 |
| 24 | Oscar spider web glue | 1 | 1350 | 1350 |
| 25 | Waterproofing coating "Ceresit 65" | 6 | 750 | 4500 |
| 26 | Rule 2.5 | 1 | 500 | 500 |
| 27 | Rule 2.0 | 1 | 400 | 400 |
| 28 | Rule 1.5 | 1 | 300 | 300 |
| 29 | Dowel nail 60/40 | 2 | 250 | 500 |
| 30 | Facade mesh 160 density | 1 | 1250 | 1250 |
| 31 | Putty "Uniflot-Knauf" | 1 | 1100 | 1100 |
| 32 | 12 liter bucket | 2 | 120 | 240 |
| 33 | Bucket 20 liters | 2 | 180 | 360 |
| 34 | Basin 60 liters | 1 | 350 | 350 |
| 35 | Masking tape, paper | 5 | 70 | 350 |
| 36 | Packaging tape | 2 | 70 | 140 |
| 37 | Self-tapping screws 0.35 universal | 2 | 130 | 260 |
| 38 | Self-tapping screws 0.65 for wood | 1 | 130 | 130 |
| 39 | Self-tapping screws 0.75 for wood | 1 | 130 | 130 |
| 40 | Self-tapping screws 0.25 universal | 2 | 130 | 260 |
| 41 | Galvanized painting corner | 18 | 35 | 630 |
| 42 | Alabaster in bags | 1 | 280 | 280 |
| 43 | Silicone in a tube | 1 | 140 | 140 |
| 44 | Glue in a tube "FixAll" | 1 | 420 | 420 |
| 45 | Crosses 1.5 for tile joints | 4 | 100 | 400 |
| 46 | Tile Joint Wedges | 2 | 100 | 200 |
| 47 | Cable NUM 3 / 1.5 "Sevkabel" | 100 | 35 | 3500 |
| 48 | Cable NUM 3 / 2.5 "Sevkabel" | 150 | 47 | 7050 |
| 49 | Cable NUM 3/4 "Sevkabel" | 36 | 82 | 2952 |
| 50 | Cable NUM 3/6 "Sevkabel" | 5 | 95 | 475 |
| 51 | Corrugation 16 | 100 | 3 | 300 |
| 52 | Corrugation 20 | 200 | 4 | 800 |
| 53 | Internet cable "FTP" | 10 | 22 | 220 |
| 54 | TV cable "SAT 703" | 40 | 25 | 1000 |
| 55 | Telephone cable "KSPV" | 10 | 12 | 120 |
| 56 | Crab TV 1/3 | 1 | 250 | 250 |
| 57 | Insulating tape | 1 | 40 | 40 |
| 58 | Punched tape | 1 | 180 | 180 |
| 59 | Lamp 150v | 5 | 40 | 200 |
| 60 | Socket boxes for concrete | 50 | 10 | 500 |
| 61 | Automatic machine 10 amp. "ABB" | 2 | 150 | 300 |
| 62 | Automatic machine 16 amp. "ABB" | 3 | 150 | 450 |
| 63 | Automatic machine 25 amp. "ABB" | 5 | 150 | 750 |
| 64 | RCD "ABB" | 1 | 1250 | 1250 |
| 65 | DIF automatic machine 25 amp. | 1 | 1350 | 1350 |
| 66 | Rebar 12 | 3 | 220 | 660 |
| 67 | ||||
| 68 | Lifting material "in tons" | 8 | 1500 | 12000 |
| 69 | Delivery of materials "gazelle" | 4 | 1500 | 6000 |
| 70 | Total: | 147 787 |